| auszookers.com https://auszookers.com/forum/ |
|
| early 1997 G13BB Baleno eng into 85 Sierra / Drover https://auszookers.com/forum/viewtopic.php?f=37&t=36610 |
Page 1 of 1 |
| Author: | sooty [ Wed Oct 24, 2012 5:12 pm ] |
| Post subject: | early 1997 G13BB Baleno eng into 85 Sierra / Drover |
Hi, Found a complete Baleno with a worn motor for $200 and i was thinking about getting it for the engine conversion. It has the coilpacks where the distributor normally is. I haven't found a G13BB conversion thread yet - still looking, do you know of a good thread? Cheers, Steve |
|
| Author: | stockman [ Wed Oct 24, 2012 5:54 pm ] |
| Post subject: | Re: early 1997 G13BB Baleno eng into 85 Sierra / Drover |
Are you sure it's a g13bb? From what I have seen all the Balenos come out with the g16b and up until 99 were all dizzy. I guess someone could of replaced it with a g13bb out of a Swift. |
|
| Author: | want33s [ Wed Oct 24, 2012 9:01 pm ] |
| Post subject: | Re: early 1997 G13BB Baleno eng into 85 Sierra / Drover |
stockman wrote: Are you sure it's a g13bb? From what I have seen all the Balenos come out with the g16b and up until 99 were all dizzy. X2..... $200 for a worn out motor is waaayyyy too much money... Baleno's with good G16B's often sell for under $500. |
|
| Author: | sooty [ Thu Oct 25, 2012 3:35 pm ] |
| Post subject: | Re: early 1997 G13BB Baleno eng into 85 Sierra / Drover |
stockman wrote: Are you sure it's a g13bb? From what I have seen all the Balenos come out with the g16b and up until 99 were all dizzy. I guess someone could of replaced it with a g13bb out of a Swift. On the firewall was a build plate with the VIN no , July 97 and G13B. |
|
| Author: | want33s [ Thu Oct 25, 2012 5:11 pm ] |
| Post subject: | Re: early 1997 G13BB Baleno eng into 85 Sierra / Drover |
Build plates are quite often WRONG... What is on the engine block? |
|
| Author: | sooty [ Thu Oct 25, 2012 8:26 pm ] |
| Post subject: | Re: early 1997 G13BB Baleno eng into 85 Sierra / Drover |
want33s wrote: Build plates are quite often WRONG... What is on the engine block? Oh... Won't be able to look until Sat. http://i748.photobucket.com/albums/xx122/J--a--y/balenoenglocn.jpg |
|
| Author: | sooty [ Fri Oct 26, 2012 7:06 pm ] |
| Post subject: | Re: early 1997 G13BB Baleno eng into 85 Sierra / Drover |
want33s wrote: Build plates are quite often WRONG... What is on the engine block? Dumb mates are quite often wrong  Attachment: baleno hayley vin.jpg It was at night - sorry fellas Found CairnsZook's Baleno G16B conversion |
|
| Author: | BlueSuzy [ Fri Oct 26, 2012 7:48 pm ] |
| Post subject: | Re: early 1997 G13BB Baleno eng into 85 Sierra / Drover |
Don't stress. I have seen a G13b Baleno with my own eyes. It must of been an import. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|
