[Creamcheese]

Hey guys,

For G13BB into Coily conversion, what is required for fuel delivery/ pressure.

Already have the Coily tank obviously, and from searching, it seems like the tank can be dropped out and a Vitara in tank pump installed?

Is it that simple?

Wiring for the pump?

Am I missing anything?

Thanks again.

Paul.

[Creamcheese]

Is this an appropriate pump?

http://www.ebay.com.au/itm/Denso-950-01 ... 773wt_1002

Sorry I'm shit house with links etc.

[tanshi]

your gonna have to wire it up i believe. but then theres alot more wiring to do to put a g13bb in.

your better off getting a complete vitara tank for the pump, and you will get one cheeper than that

[Creamcheese]

Thanks tanshi.

I realised the wiring question was pretty stupid after I clicked post.

I have a very neat loom from Mr Fully Sik Custom Cables with detailed instructions about the purple wire going to the fuel pump..... So forget that.

Thanks for your reply.

[Fatzook]

Creamcheese wrote:

Is this an appropriate pump?

http://www.ebay.com.au/itm/Denso-950-01 ... 773wt_1002

Sorry I'm shit house with links etc.

Thats just the pump. You need the cradle that it mounts to also. And the cradle needs to be shortened also.

Still, its far easier to do this than mount a vitara tank.

[jonno_racing]

Fatzook wrote:

Thats just the pump. You need the cradle that it mounts to also. And the cradle needs to be shortened also.

mine bolted straight in.
the coiler tank with a s/h vit pump is dead easy. make sure you get some of the wiring. straight bolt in.

proberbly not the best option but no need to make new mounts is always a bonus

[Creamcheese]

Thanks guys. All done.

[droverdave]

What is the difference between a coily tank and a non-coily tank?

[tanshi]

coily tank is built to take a high pressure pump for efi. has a built in swirl pot.

standard one doesnt have any of that.