| auszookers.com https://auszookers.com/forum/ |
|
| Sierra starter motor - two types? https://auszookers.com/forum/viewtopic.php?f=37&t=40503 |
Page 1 of 1 |
| Author: | coily96 [ Wed Apr 24, 2013 1:55 pm ] |
| Post subject: | Sierra starter motor - two types? |
Both these starters are listed for the sierra. One mentions it suits (some). One is alot bigger than the other, here are the specs http://www.pinpoint.aea.com.au/Guest_pc ... bl=Starter http://www.pinpoint.aea.com.au/Guest_pc ... bl=Starter Need the one to suit a g13ba. Any help would be great. |
|
| Author: | losfer [ Wed Apr 24, 2013 2:49 pm ] |
| Post subject: | Re: Sierra starter motor - two types? |
the one in the second pic suits a swift or fwd configured gearbox with the offset holes on the nosecone of the starter. |
|
| Author: | bulladean_ [ Wed Apr 24, 2013 3:30 pm ] |
| Post subject: | Re: Sierra starter motor - two types? |
I bought a starter moter a month ago and the guy gave me the second one which does not fit |
|
| Author: | alien [ Wed Apr 24, 2013 4:15 pm ] |
| Post subject: | Re: Sierra starter motor - two types? |
there are 2 versions though... there's the stock sized one and there's a smaller aftermarket version which is better for people running g16 blocks. |
|
| Author: | coily96 [ Wed Apr 24, 2013 4:37 pm ] |
| Post subject: | Re: Sierra starter motor - two types? |
Can i fit the fatter version of the top one to my 1.3? I pulled it out of a very early jimny |
|
| Author: | losfer [ Fri Apr 26, 2013 2:00 am ] |
| Post subject: | Re: Sierra starter motor - two types? |
yes you can , the fatter one is just a direct drive off the armature , the thinner one has a little "gearbox" in it (reduction drive) the thinner one produces more torque , the fatter one works fine and has done in many a sierra. |
|
| Author: | coily96 [ Sat Apr 27, 2013 10:03 pm ] |
| Post subject: | Re: Sierra starter motor - two types? |
Thanks |
|
| Author: | coily96 [ Wed May 01, 2013 5:33 pm ] |
| Post subject: | Re: Sierra starter motor - two types? |
Just fitted the g13bb jimny starter motor, was exactly the same size and shape as the one i pulled out. Repacement one sounds a little different than the old one, do they need lining up perfect when fitting it or just line bolts up and tighten? |
|
| Author: | buzbox [ Wed May 01, 2013 7:17 pm ] |
| Post subject: | Re: Sierra starter motor - two types? |
mine turned out to be the same as my Vitara viewtopic.php?f=5&t=36170&hilit=starter+motor |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|