Cheers mate.
| auszookers.com https://auszookers.com/forum/ |
|
| GTi into Sierra 3 wires left. https://auszookers.com/forum/viewtopic.php?f=37&t=42037 |
Page 1 of 1 |
| Author: | samboy1123 [ Sat Jul 20, 2013 5:08 pm ] |
| Post subject: | GTi into Sierra 3 wires left. |
Hey Guys, I've just swapped in my gti motor into my sierra, atm its running (roughly) but I have a 3 wires in the new loom not yet connected. 1 is a black/yellow wire, C1 pin on the ECM called the start signal atm it's not connected is this right? The other 2 are the wires from the alternator plug, atm I have the alternator connected to the old loom plug (original sierra one) and not the new loom (swift gti one) would this effect anything? Should I connect it to the new loom or join both the looms? Cheers Sam |
|
| Author: | BlueSuzy [ Sun Jul 21, 2013 9:46 am ] |
| Post subject: | Re: GTi into Sierra 3 wires left. |
Starter, I connected the signal for mine for G16b Baleno. Used sierra standard wire, but joined onto the Baleno harness for the ecu. Not sure if its needed, but may as well. 1 wire. Alt, i used sierra harness but added a fuse for the main battery charge circuit. I used the sierra wires as it goes straight to the light on the dash. Think i deleted the Baleno wires. |
|
| Author: | samboy1123 [ Sun Jul 21, 2013 9:11 pm ] |
| Post subject: | Re: GTi into Sierra 3 wires left. |
Cheers mate.
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|