Hey guys the add was wrong it is actually a 98 If that matters. Here are the engine photos
Is that a dizzy or a coil pack??
| auszookers.com https://auszookers.com/forum/ |
|
| 1996 Baleno engine and loom into 89 Sierra https://auszookers.com/forum/viewtopic.php?f=37&t=42560 |
Page 1 of 1 |
| Author: | azzas15 [ Tue Aug 20, 2013 4:48 pm ] |
| Post subject: | 1996 Baleno engine and loom into 89 Sierra |
Hey guys, Going to look at a 1996 belano tomorrow. Ill just be using it for the engine and loom to do the engine conversion on my 89 sierra. Ill be using the benT kit. My question is will the loom be ok to use once I cut away the parts I don't need? Wasn't to sure if I needed a specific loom from a certain car For $300 for the entire car I think it's a great deal and will at least let me get the conversion started. Cheers Aaron |
|
| Author: | tanshi [ Tue Aug 20, 2013 5:04 pm ] |
| Post subject: | Re: Belano engine and loom |
it will be a dizzy motor and no good for a conversion into a sierra. you need the coil pack model |
|
| Author: | azzas15 [ Tue Aug 20, 2013 5:32 pm ] |
| Post subject: | Re: Belano engine and loom |
Well sir you saved me $300 haha. Ill have to do some more research to work out which car has the correct engine I'm after Cheers for the help |
|
| Author: | bakerboy [ Tue Aug 20, 2013 6:03 pm ] |
| Post subject: | Re: Belano engine and loom |
The dizzy motor can be made to work its been done before, saying it flat out doesnt work is bs |
|
| Author: | boostedbrick [ Tue Aug 20, 2013 6:15 pm ] |
| Post subject: | Re: Belano engine and loom |
Try using the search function, there are a few recent threads covering what you need to do to make it work. I can't seem to post the links off my phone. |
|
| Author: | azzas15 [ Tue Aug 20, 2013 6:21 pm ] |
| Post subject: | Re: Belano engine and loom |
Hey guys the add was wrong it is actually a 98 If that matters. Here are the engine photos Is that a dizzy or a coil pack?? |
|
| Author: | Scrawny [ Tue Aug 20, 2013 6:23 pm ] |
| Post subject: | Re: Belano engine and loom |
Those are coil packs on the back end of the head |
|
| Author: | azzas15 [ Tue Aug 20, 2013 6:47 pm ] |
| Post subject: | Re: Belano engine and loom |
Ok sweet so suitable for the benT kit? |
|
| Author: | Scrawny [ Tue Aug 20, 2013 6:55 pm ] |
| Post subject: | Re: Belano engine and loom |
You'll have to relocate the coils as the firewall will be there and you'll also have to reroute the water hoses but I can't see why you can't use this motor |
|
| Author: | tanshi [ Wed Aug 21, 2013 8:03 am ] |
| Post subject: | Re: Belano engine and loom |
sorry ive never seen one with the coil packs there. most of the time they are on the rocker cover |
|
| Author: | azzas15 [ Wed Aug 21, 2013 8:43 am ] |
| Post subject: | Re: Belano engine and loom |
No worries Tanshi. Going to have a look tonight. For the price I'm not to worried It has a nice set of rims which I could easily sell and get my money back |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|