auszookers.com
https://auszookers.com/forum/

Baleno loom g16b for sierra questions
https://auszookers.com/forum/viewtopic.php?f=37&t=43127		 Page 1 of 1
Author:  azzas15 [ Tue Sep 24, 2013 10:34 pm ]
Post subject:  Baleno loom g16b for sierra questions
Hi All,

Just working on part of my loom with the main fuse box

Image

Got rid of the stuff like lights, horn & A/C but there is one I'm not too sure about and this is labeled "FI MAIN" and the "FI" fuse

I just wanted to know if this can also be removed?

Cheers,
Azza
Author:  stockman [ Tue Sep 24, 2013 10:58 pm ]
Post subject:  Re: Baleno loom g16b for sierra questions
You'll be needing that. Fuel Injection.
Author:  azzas15 [ Tue Sep 24, 2013 11:00 pm ]
Post subject:  Re: Baleno loom g16b for sierra questions
Ahh the abbreviation makes sense.. Thanks.

Time for bed!
Author:  azzas15 [ Tue Oct 08, 2013 8:51 pm ]
Post subject:  Re: Baleno loom g16b for sierra questions
Hi all just working on the main part of the loom now and have a question with the tacho

From pj zooks diagram I only need:

Brown for Tacho feed

Black white for check engine

Can I simply cut the other wires away until I'm ready to interstate this into my sierra?

Image
Author:  azzas15 [ Wed Oct 09, 2013 9:31 pm ]
Post subject:  Re: Baleno loom g16b for sierra questions
Never mind just had a moment and all of a sudden I understand what I'm doing!
Author:  Rhinoman [ Thu Oct 10, 2013 6:21 am ]
Post subject:  Re: Baleno loom g16b for sierra questions
Don't cut the wires - extract the pins with a small jeweller's screwdriver or similar. Its a lot tidier and less of an issue if you take out the wrong pin.
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/