| auszookers.com https://auszookers.com/forum/ |
|
| king pin bearings https://auszookers.com/forum/viewtopic.php?f=37&t=43189 |
Page 1 of 1 |
| Author: | youda [ Sun Sep 29, 2013 1:25 pm ] |
| Post subject: | king pin bearings |
Hey guys, is there a way to get to the king pin bearings from the back without taking all the bearing etc ou?. my kingpin bearings have clapped out but my wheel bearings are all good and i would like to avoid pulling them out again if i can. |
|
| Author: | sideways [ Sun Sep 29, 2013 3:39 pm ] |
| Post subject: | Re: king pin bearings |
For what vehicle? Drop the tie rod, pull the FWH/drive flange off so you can undo the circlip on the CV, pull the king pins out then pull the whole knuckle off. |
|
| Author: | youda [ Mon Sep 30, 2013 5:38 pm ] |
| Post subject: | Re: king pin bearings |
it is a sj50 wt suzuki sierra, but you do appear to have answered my question anyway. thank you |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|