| auszookers.com https://auszookers.com/forum/ |
|
| Vit man gearbox input shaft bearing replacement https://auszookers.com/forum/viewtopic.php?f=37&t=43497 |
Page 1 of 1 |
| Author: | stem1 [ Sun Oct 20, 2013 2:38 pm ] |
| Post subject: | Vit man gearbox input shaft bearing replacement |
Can the input shaft be removed from the front of the gearbox (like the old holdens) without disassembly of the gearbox? Are there uncaged needle rollers waiting to drop out into the gearbox? Thanks |
|
| Author: | stem1 [ Tue Oct 22, 2013 5:05 pm ] |
| Post subject: | Re: Vit man gearbox input shaft bearing replacement |
Upon reading the service manual, it is not clear if the input shaft bearing retainer is the only thing preventing the removal of the input shaft without splitting the case. Does anyone know if the circlip around the input shaft bearing sits flush up against the front of the case and is held by the retainer, or if it sits in a groove machined into the case? |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|