How hard is it to put p/steer and a/c into a sierra? Jimny stuff bolts in. You can use a Vitara steering box with an adapter So its a direct bolt up with the G16B with the jimny gear? nice!

How hard is it to put a J20A in , does it require a stronger transfer case. donor would be a 1.3L sierra Quite hard. You'l need to chop the trans tunnel out, make new engine mounts and all sorts of things like that. The Sierra transfer should live depending on your driving style. Why do you want a J20a? A G16b is a much easier and much more well trodden path. I was hoping there were a few build threads and kits made up on the J20A; obviously there isnt? I drove a 1.6 and 2L vitara and the 2L felt better to me; in torque and top end


Also someone on the facebook page said there was a LWB soft top as the discussion was about a hard canopy for a LWB. Whats the differences between them Basiically, the wheelbase. There's no real differences between LWB and SWB aside from the length.


also is a WT better? can you get hard canopies for them as well ? Depends what you want to do with it. Buy a NT if you want to do heaps of hardcore offroading so you can utilize the narrower spring spacing and fit WT diffs. Otherwise, buy a WT. Do not buy a coily if you want to mod stuff. Yes you can get canopies for them, they're a little rare these days though. So buy a Normal width track, mkay!


Had no luck finding a nice 2L vitara lately so im resorting back to the tin box sierra