| auszookers.com https://auszookers.com/forum/ |
|
| Jimny tyre size https://auszookers.com/forum/viewtopic.php?f=37&t=43631 |
Page 1 of 1 |
| Author: | BRiteBak [ Tue Oct 29, 2013 9:29 am ] |
| Post subject: | Jimny tyre size |
So I'm planning on building up my Jimny and am looking at a 2" lift and 2" body lift, What kind of rubber can i fit under that? Should I even lift body and suspension? Sorry for the nooby questions Thanks for the help! |
|
| Author: | 31zook [ Tue Oct 29, 2013 10:31 am ] |
| Post subject: | Re: Jimny Tire Size |
When you click on Suzuki talk there is a noob question section, if your at all concerned with being flammed, just ask it in there. In answer to your question, thats 100mm of lift and im running 31s with less lift then that. 235s and a little bit of guard trimming will fit with 40mm sprung lift. |
|
| Author: | BRiteBak [ Tue Oct 29, 2013 10:48 am ] |
| Post subject: | Re: Jimny Tire Size |
Cheers, Probably aiming for 31's anyway |
|
| Author: | JayKay [ Tue Oct 29, 2013 2:19 pm ] |
| Post subject: | Re: Jimny Tire Size |
what 31zook said - I have 3" spring Lift and have 30's with slight scrubbing that requires a slight guard chop. |
|
| Author: | Jezza86 [ Thu Oct 31, 2013 11:25 am ] |
| Post subject: | Re: Jimny tyre size |
i run 30"s with 3" springs and 2" BL. i still get minor scrubbing in very crossed up situations but nothing you would think twice about driving right on through. as above, chop chop is your best solution |
|
| Author: | shep [ Thu Oct 31, 2013 1:02 pm ] |
| Post subject: | Re: Jimny tyre size |
I have 4" spring lift with new radius arms. 30" tyres fit fine and it drives better then stock |
|
| Author: | Jezza86 [ Thu Oct 31, 2013 5:41 pm ] |
| Post subject: | Re: Jimny tyre size |
shep wrote: I have 4" spring lift with new radius arms. 30" tyres fit fine and it drives better then stock and thats without the front sway bar. same here, proper springs do more than a sway bar anyway |
|
| Author: | Mike57 [ Fri Nov 01, 2013 8:26 pm ] |
| Post subject: | Re: Jimny tyre size |
You will need to consider gearing as well with that tyre size. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|