| auszookers.com https://auszookers.com/forum/ |
|
| g16a into 81 sierra questions https://auszookers.com/forum/viewtopic.php?f=37&t=43797 |
Page 1 of 1 |
| Author: | bdawson [ Sat Nov 09, 2013 4:32 am ] |
| Post subject: | g16a into 81 sierra questions |
hey with putting the g16a into a 1lt sierra do I need to change the gearbox and the wiring from the vitara or can I keep it from the sierra? and would I need to get engine mounts or should it fit straight in? |
|
| Author: | 31zook [ Sat Nov 09, 2013 4:53 am ] |
| Post subject: | Re: g16a into 81 sierra questions |
Considering the amount of info on this it's going in the noob section. |
|
| Author: | zooky08 [ Sat Nov 09, 2013 8:55 pm ] |
| Post subject: | Re: g16a into 81 sierra questions |
Youll need a 5 speed gear box from a 1 3l sierra. A adapter kit to adapt gearbox. engine mounts on chassis has to be moved. new gearbox crossmember needs ti be fabricated. Not sure on wiring |
|
| Author: | 303zuke [ Mon Nov 11, 2013 8:27 pm ] |
| Post subject: | Re: g16a into 81 sierra questions |
And on an early SJ40 (1981, right?) you will nedd to panel bash the transmission tunnel to fit the physically larger 5 speed gearbox. And rewire the charging circuit from the F10A 's externally regulated alternator to the G series internally regulated alternator. You can't hang the early Alt off the later engines. |
|
| Author: | bdawson [ Tue Nov 12, 2013 4:58 am ] |
| Post subject: | Re: g16a into 81 sierra questions |
no worries I will see how I go thanks heaps |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|