| auszookers.com https://auszookers.com/forum/ |
|
| Ring Gap F10a https://auszookers.com/forum/viewtopic.php?f=37&t=43865 |
Page 1 of 1 |
| Author: | mmiller6512 [ Tue Nov 12, 2013 5:46 pm ] |
| Post subject: | Ring Gap F10a |
Could someone please tell me the ring gaps for a 1 litre. Thanks, |
|
| Author: | sideways [ Tue Nov 12, 2013 6:19 pm ] |
| Post subject: | Re: Ring Gap FA10 |
0.15-0.35mm for the comp rings and 0.30-0.90 for the oil. Service limits are 0.7 and 1.8mm respectively. |
|
| Author: | mmiller6512 [ Tue Nov 12, 2013 6:30 pm ] |
| Post subject: | Re: Ring Gap FA10 |
Thanks Sideways, |
|
| Author: | sideways [ Tue Nov 12, 2013 7:26 pm ] |
| Post subject: | Re: Ring Gap FA10 |
No probs. |
|
| Author: | losfer [ Wed Nov 13, 2013 8:55 pm ] |
| Post subject: | Re: Ring Gap FA10 |
as a general rule i allow 3 thou per inch of bore . |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|