| auszookers.com https://auszookers.com/forum/ |
|
| Distributor Wiring https://auszookers.com/forum/viewtopic.php?f=37&t=46465 |
Page 1 of 1 |
| Author: | mmiller6512 [ Sat May 31, 2014 7:51 pm ] |
| Post subject: | Distributor Wiring |
Hello All I have a electronic dizzy for my old sierra that had points and i am not sure of the way the wires should go. There is a yellow and a black Any help would be great |
|
| Author: | 410 [ Mon Jan 05, 2015 8:03 am ] |
| Post subject: | Re: Distributor Wiring |
Yellow goes in positive on coil and black should go to the black wire in the loom that runs down to the coil |
|
| Author: | want33s [ Mon Jan 05, 2015 6:36 pm ] |
| Post subject: | Re: Distributor Wiring |
You also need to remove the ballast resistor so the electronic dissy gets 12volts not 7 point something points run on. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|