If it's the 1l transfer with the 4WD light switch then yes, you can just swap the flanges. If it's the non-switch type then you need to make up some hybrid tailshafts/unijoints because the flange spline is different.
| auszookers.com https://auszookers.com/forum/ |
|
| 1.3l transfer to replace 1l transfer ? https://auszookers.com/forum/viewtopic.php?f=37&t=46769 |
Page 1 of 1 |
| Author: | rmkymy [ Fri Jun 27, 2014 12:21 am ] |
| Post subject: | 1.3l transfer to replace 1l transfer ? |
Hi guys just wondering if i can put my W/T 1.3l transfer case with 4.9:1 reduction gears into my 1l comp car ? went pretty good but found myself having to ride the clutch ALOT haha im guessing the output flanges will be different can i swap the flanges over from the 1l transfer to the 1.3 transfer and bolt it in ? Heres a video of the beasty, brought it for 150 bucks and came first in the "extreme mud course challenge" out of 50 cars! http://youtu.be/Y9gNIzgHX_g |
|
| Author: | sideways [ Fri Jun 27, 2014 1:14 am ] |
| Post subject: | Re: 1.3l transfer to replace 1l transfer ? |
If it's the 1l transfer with the 4WD light switch then yes, you can just swap the flanges. If it's the non-switch type then you need to make up some hybrid tailshafts/unijoints because the flange spline is different.
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|