[SORT]

Hi guys

Just looking for some advise based on experiences.

I've decided to attempt to run 31s on my sierra with 2" sus + 2" bod lift.

Just wondering what tyre width (inches please) would still allow it to maintain a decent turning circle I haven't made my changes to the guards other then wider flares.

Cheers

[want33s]

Tyre width isn't really the issue.
Rim width is.
I'd suggest 15x7 -13 or -24 if you can find them.

[alien]

procomp do a 15x7-38 =)

[SORT]

Ok cheers,

And with the correct offset would be a good tyre width?

[want33s]

SORT wrote:

Ok cheers,

And with the correct offset would be a good tyre width?

On a 7 inch rim you don't want to go any wider than a 10.5 inch tyre.
Ideally (on a sierra) you want the skinniest tyre you can get in the height you want... eg:30x9.5

[alien]

15x7-38 clears a 31x10.5" tyre by a mile... you will DEFINITELY want some 5.14 or 6.5 tcase gears though. If you're sticking with the 1.3L engine, go with 6.5's.

[want33s]

alien wrote:

15x7-38 clears a 31x10.5" tyre by a mile....

Except you'll need to remove the bumper outriggers and part of the the front bar, then you'll need at least 3 inch wide flares outside the original wt flares.