| auszookers.com https://auszookers.com/forum/ |
|
| Jimny UHF Radio Install https://auszookers.com/forum/viewtopic.php?f=37&t=47181 |
Page 1 of 1 |
| Author: | Rob` [ Mon Jul 28, 2014 10:18 am ] |
| Post subject: | Jimny UHF Radio Install |
Hi all, I've been searching through the forums for installs people have done for their CB radio. I've got a Uniden UH-7740NB UHF Radio (http://www.uniden.com.au/australia/p_uh7740nb_index.asp), but at the moment I've only got it velcro'd to the carpet on the transmission tunnel (because I'm a pro at this). I'm looking for a more permanent and prettier solution, so does anyone have any photos of installs of UHF radio installs underneath the ash tray, or another place where I won't have to cut up the dash or similar. As always, any help / guidance is appreciated. |
|
| Author: | pete_79 [ Mon Jul 28, 2014 11:53 am ] |
| Post subject: | Re: Jimny UHF Radio Install |
I mounted my GME in the ashtray slot, but it looks like your Uniden is about 20mm wider and a few mm higher then my unit so might not fit. Here's mine for reference anyway.  I flattened the sides of the metal ashtray slide and drilled 2 holes for the screws on the side of the unit. |
|
| Author: | Jezza86 [ Mon Jul 28, 2014 12:11 pm ] |
| Post subject: | Re: Jimny UHF Radio Install |
http://www.uniden.com.au/RESOURCES_MAIN ... 0NB_OM.pdf page 10 DIN-E Sleeve, DIN-E rubber ring and keys for vehicle installation (UH7750NB only) put it in the dash and get a single din head unit. 
|
|
| Author: | ozzycouch [ Mon Jul 28, 2014 12:27 pm ] |
| Post subject: | Re: Jimny UHF Radio Install |
Mine ended up on the roof (Vitara) with an extension running the mic in to the glove box. 
|
|
| Author: | Rob` [ Tue Jul 29, 2014 7:04 am ] |
| Post subject: | Re: Jimny UHF Radio Install |
I had a look under the dash last night where I wanted to put it, I think it should be ok if I make up some type of bracket... I'll keep having a dig around and if I find anything I'll report back haha |
|
| Author: | Bugsta [ Fri Aug 01, 2014 9:41 pm ] |
| Post subject: | Re: Jimny UHF Radio Install |
Jezza86 wrote: http://www.uniden.com.au/RESOURCES_MAIN/pdfs/UH7740NB_UH7750NB_OM.pdf page 10 DIN-E Sleeve, DIN-E rubber ring and keys for vehicle installation (UH7750NB only) put it in the dash and get a single din head unit. Hey what brand is that head unit? I'm looking for a screen that can display more than just a couple of lines. Don't want CD but would like Bluetooth phone connection. |
|
| Author: | Jezza86 [ Sat Aug 02, 2014 7:49 am ] |
| Post subject: | Re: Jimny UHF Radio Install |
45 bucks from china. 4x65w outputs Never had a problem in 3 years. No brand name |
|
| Author: | Bugsta [ Sun Aug 03, 2014 10:46 pm ] |
| Post subject: | Re: Jimny UHF Radio Install |
As in eBay? |
|
| Author: | Jezza86 [ Sun Aug 03, 2014 10:48 pm ] |
| Post subject: | Re: Jimny UHF Radio Install |
Aliexpress but sure you could find one on ebay |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|