[Rob`]

Hi all,

I've been searching through the forums for installs people have done for their CB radio. I've got a Uniden UH-7740NB UHF Radio (http://www.uniden.com.au/australia/p_uh7740nb_index.asp), but at the moment I've only got it velcro'd to the carpet on the transmission tunnel (because I'm a pro at this).

I'm looking for a more permanent and prettier solution, so does anyone have any photos of installs of UHF radio installs underneath the ash tray, or another place where I won't have to cut up the dash or similar.

As always, any help / guidance is appreciated.

[pete_79]

I mounted my GME in the ashtray slot, but it looks like your Uniden is about 20mm wider and a few mm higher then my unit so might not fit.

Here's mine for reference anyway.


I flattened the sides of the metal ashtray slide and drilled 2 holes for the screws on the side of the unit.

[Jezza86]

http://www.uniden.com.au/RESOURCES_MAIN ... 0NB_OM.pdf
page 10

DIN-E Sleeve, DIN-E rubber
ring and keys for vehicle
installation
(UH7750NB only)

put it in the dash and get a single din head unit.

[ozzycouch]

Mine ended up on the roof (Vitara) with an extension running the mic in to the glove box.

[Rob`]

I had a look under the dash last night where I wanted to put it, I think it should be ok if I make up some type of bracket... I'll keep having a dig around and if I find anything I'll report back haha

[Bugsta]

Jezza86 wrote:

http://www.uniden.com.au/RESOURCES_MAIN/pdfs/UH7740NB_UH7750NB_OM.pdf
page 10

DIN-E Sleeve, DIN-E rubber
ring and keys for vehicle
installation
(UH7750NB only)

put it in the dash and get a single din head unit.

Hey what brand is that head unit? I'm looking for a screen that can display more than just a couple of lines. Don't want CD but would like Bluetooth phone connection.

[Jezza86]

45 bucks from china. 4x65w outputs
Never had a problem in 3 years.
No brand name

[Bugsta]

As in eBay?

[Jezza86]

Aliexpress but sure you could find one on ebay