auszookers.com
https://auszookers.com/forum/

GTI - timing check - cam position for No. 1 firing
https://auszookers.com/forum/viewtopic.php?f=37&t=47275		 Page 1 of 1
Author:  ChrisN [ Sun Aug 03, 2014 8:51 pm ]
Post subject:  GTI - timing check - cam position for No. 1 firing
Just need to check if I have this right. Checking if I have the distributor and rotor set up correctly. With the two camshafts and the crank all at their correct locations for installing a timing belt, as per the attached diagram, is this the firing position for the No. 1 cylinder? (IE with the rotor button pointing at the terminal for No.1.) Thanks! :)

Image
Author:  JrZook [ Sun Aug 03, 2014 10:28 pm ]
Post subject:  Re: GTI - timing check - cam position for No. 1 firing
Yes. IIRC cylinder #1 is the closest to the firewall
Author:  ChrisN [ Tue Aug 05, 2014 4:29 pm ]
Post subject:  Re: GTI - timing check - cam position for No. 1 firing
Thanks for that. I think that No 1 is usually the one closest to the timing gear. One and 4 are both at TDC at the moment, hopefully with the correct one at the top of the compression stroke!

Found it

Image
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/