auszookers.com • View topic - Jimny throwout bearing sticking

Board index » Talking About Stuff » N00b Talk

Jimny throwout bearing sticking

Page 1 of 1

[ 6 posts ]

Print view

Previous topic | Next topic

Author

Message

Jezza86

Platinum Supporter

Joined: Tue Dec 06, 2011 9:30 am
Posts: 2155
Location: Nhulunbuy 0880
Vehicle: 2010 jimny

Posted: Mon Sep 29, 2014 5:39 pm

Hi Guys
My bearings are making my clutch stick. figure they need doing the amount of water and mud I make the car swim through

so if I'm pulling out the gearbox I should also do what? Main rear seal i have heard, and been told to go genuine on that...
my clutch? (It sometimes shudders, probably from the grease thats suposed to be on the spigot.)

and after telling me what to buy, any suggestions on where to buy it incase i cant get it all from 4wd_products

_________________
your daily dose of questionable sanity

atari4x4

az supporter

Joined: Mon Dec 11, 2006 10:30 pm
Posts: 34843
Location: East Radelayed
Vehicle: SV420+SV620 Vitara's

Posted: Mon Sep 29, 2014 5:51 pm

You need a stage42 11ty puk, brass nipple racing crutch.

_________________
You're just hating because you don't understand

Scrawny

I live here!

Joined: Tue Jan 29, 2008 10:30 pm
Posts: 10528
Location: Brissie
Vehicle: Popemobile

Posted: Mon Sep 29, 2014 6:00 pm

If you can, get the flywheel machined. The shudders are from hot (high) spots on the flywheel and pressure plate.

Jezza86

Platinum Supporter

Joined: Tue Dec 06, 2011 9:30 am
Posts: 2155
Location: Nhulunbuy 0880
Vehicle: 2010 jimny

Posted: Mon Sep 29, 2014 7:15 pm

not a option in town but thanks for the info. after 20 000 km im going to take the gamble on it only being mud and grease.
thanks atari, Exedy SZK-7245HDB in the cart

seriously but. spigot bearings?

_________________
your daily dose of questionable sanity

Jezza86

Platinum Supporter

Joined: Tue Dec 06, 2011 9:30 am
Posts: 2155
Location: Nhulunbuy 0880
Vehicle: 2010 jimny

Posted: Mon Sep 29, 2014 7:25 pm

SZK-7245HD clutch $425.00 (suzistore)
DCT-47 alignment tool (dunno)
6002LLU spigot bearing/ bush. (Dunno)

Rear main oil seal 65 bucks (suzistore)

anything else to add?

_________________
your daily dose of questionable sanity

henno

I live here!

Joined: Tue Jul 23, 2013 5:56 pm
Posts: 2439
Location: Brisbane
Vehicle: Which one?

Posted: Mon Sep 29, 2014 7:27 pm

The spigot bearing should be cheap as chips. Like, 8 bucks cheap.

Page 1 of 1

[ 6 posts ]

Board index » Talking About Stuff » N00b Talk

Who is online

Users browsing this forum: No registered users and 4 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum