| auszookers.com https://auszookers.com/forum/ |
|
| sierra water pump t belt install https://auszookers.com/forum/viewtopic.php?f=37&t=48344 |
Page 1 of 1 |
| Author: | yareckonillgetupthat [ Wed Nov 05, 2014 5:46 pm ] |
| Post subject: | sierra water pump t belt install |
anyone here wana with a torque wrench wana a help me replace the water pump and timing belt in my sj70 ill give ya some money i don't want to take it to a mechanic cause he won't let me watch how its done I've got a pretty good idea but I've never used a torque wrench I'm on the central coast if any ones keen ,cheers |
|
| Author: | jdk81 [ Thu Nov 06, 2014 6:09 am ] |
| Post subject: | Re: sierra water pump t belt install |
Buy a torque wrench read instructions watch youtube videos download factory service manual obtain haynes service manual Read then DIY? |
|
| Author: | graygray [ Wed Nov 26, 2014 6:25 pm ] |
| Post subject: | Re: sierra water pump t belt install |
buy the cd off eBay it has the manual and some extra helpful tips i got mine for around $3 just search fro sierra manual |
|
| Author: | atari4x4 [ Wed Nov 26, 2014 6:29 pm ] |
| Post subject: | Re: sierra water pump t belt install |
you could even read the good tech write up in the good tech section... it's for a g16a but same shit, different smells. |
|
| Author: | Marko_SJ [ Wed Nov 26, 2014 7:22 pm ] |
| Post subject: | Re: sierra water pump t belt install |
Perhaps go the whole nine yards and do your cam and crank seal at the same time. You will need a massive rattle gun to get the pulley bolts off. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|