Is it this screw on the far left of the image??
| auszookers.com https://auszookers.com/forum/ |
|
| PLEASE SHOW ME!!! https://auszookers.com/forum/viewtopic.php?f=37&t=50638 |
Page 1 of 1 |
| Author: | ZookiBoi [ Tue Jul 28, 2015 9:09 am ] |
| Post subject: | PLEASE SHOW ME!!! |
Can someone, ANYONE, show me an image clearly outlining where the F&CK the warm idle screw is on the carby of a G13ba engine from a 1991 suzuki JX sierra. PLEASE. Thank you |
|
| Author: | ZookiBoi [ Tue Jul 28, 2015 9:11 am ] |
| Post subject: | Re: PLEASE SHOW ME!!! |
Is it this screw on the far left of the image??
|
|
| Author: | jdk81 [ Tue Jul 28, 2015 9:48 am ] |
| Post subject: | Re: PLEASE SHOW ME!!! |
Its the long screw, just below the numbers 1 and 3. The screw far left is the fast idle (1500-2500 rpm at less than 25 degrees C water temp) |
|
| Author: | ZookiBoi [ Tue Jul 28, 2015 9:56 am ] |
| Post subject: | Re: PLEASE SHOW ME!!! |
Thank you very much. Ok I think then there must be some vacuum leak because I can screw that screw all the way in and out and nothing changes. |
|
| Author: | jdk81 [ Tue Jul 28, 2015 10:27 am ] |
| Post subject: | Re: PLEASE SHOW ME!!! |
It can be a problem with the choke incorrect fast idle setting vacuum leak a problem with the links (if someone has fiddled with the carby recently) timing/vac advance vacuum hoses incorrectly connected download a FSM http://www.suzukiinfo.com/sierra/suzuki ... 413fsm.pdf |
|
| Author: | ZookiBoi [ Tue Jul 28, 2015 10:51 am ] |
| Post subject: | Re: PLEASE SHOW ME!!! |
Thanks mate. I will keep playing with those things listed and see what happens. Cheers again. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|