| auszookers.com https://auszookers.com/forum/ |
|
| Installing transfer gears / getting them installed https://auszookers.com/forum/viewtopic.php?f=37&t=50969 |
Page 1 of 1 |
| Author: | christojen [ Mon Sep 07, 2015 9:30 am ] |
| Post subject: | Installing transfer gears / getting them installed |
Hi All, I have a 88 1.3L sierra with a 2inch OME lift and 31s I want to put 4.9 gears in and am wondering if anyone can give me a heads up on the difficulty level of installing transfer gears, looks like one needs a hydraulic press and some specialty tools. I am a relatively capable DIY mechanic but generally avoid things with fine tolerances and big opportunities for screwing it up. I am interested in perhaps farming out some or all of the work if that is going to be the best / most reliable option - I am based in Melbourne. Don't have lots of time to phaff around with things even if i could learn as i go. Would also consider a change over transfer case if that is a good way to go Keen to hear your thoughts. Chris |
|
| Author: | coily96 [ Tue Sep 08, 2015 7:39 pm ] |
| Post subject: | Re: Installing transfer gears / getting them installed |
Check out the instuctions off lowrange offroad.com. Very detailed with photos. |
|
| Author: | christojen [ Thu Sep 10, 2015 9:04 pm ] |
| Post subject: | Re: Installing transfer gears / getting them installed |
Yeah thanks I have seen that, it does not help me to know if it is easy to do etc. Can I simplify and ask, are all the diy crowd doing this job themselves? Thanks, Chris |
|
| Author: | J--A--C--K [ Sun Sep 13, 2015 9:07 am ] |
| Post subject: | Re: Installing transfer gears / getting them installed |
It is diy able . A lot of guys do It , I have and I have not spcalty tools other than a few lengths of heavy walled pipe and a lump of steel I use as an anvil. |
|
| Author: | fergy [ Sun Sep 13, 2015 10:20 pm ] |
| Post subject: | Re: Installing transfer gears / getting them installed |
I'm doing mine ATM with a 3year old supervising It is taking a while If you are unsure get a second transfer and build that one |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|