| auszookers.com https://auszookers.com/forum/ |
|
| 4.3 diffs in 98 Jimny https://auszookers.com/forum/viewtopic.php?f=37&t=51963 |
Page 1 of 1 |
| Author: | VanDangles [ Thu Feb 18, 2016 9:59 am ] |
| Post subject: | 4.3 diffs in 98 Jimny |
Hi I have searched throughout the web looking for a tutorial in regards to swapping front and rear 4.3 diffs from a VVT 2005+ into a 98 Jimny so I can return my gearing back to standard after fitting bigger tyres. How easy is this? Are they a straight bolt off bolt on or is there modification of the diff housing required? Thanks in advance. |
|
| Author: | tanshi [ Thu Feb 18, 2016 10:10 am ] |
| Post subject: | Re: 4.3 diffs in 98 Jimny |
if you buy whole diffs they are bolt in |
|
| Author: | VanDangles [ Thu Feb 18, 2016 11:36 am ] |
| Post subject: | Re: 4.3 diffs in 98 Jimny |
Thanks for the reply, would you know if the centres are a straight swap? |
|
| Author: | Jezza86 [ Thu Feb 18, 2016 12:27 pm ] |
| Post subject: | Re: 4.3 diffs in 98 Jimny |
keep in mind if you dont have a full floating conversion in the rear end the axles dont just slide out. |
|
| Author: | VanDangles [ Thu Feb 18, 2016 1:40 pm ] |
| Post subject: | Re: 4.3 diffs in 98 Jimny |
So it has to be a whole diff swap and not just the centres? |
|
| Author: | Jezza86 [ Thu Feb 18, 2016 1:58 pm ] |
| Post subject: | Re: 4.3 diffs in 98 Jimny |
pretty sure the only difference is the R&P. |
|
| Author: | VanDangles [ Thu Feb 18, 2016 2:07 pm ] |
| Post subject: | Re: 4.3 diffs in 98 Jimny |
Thank you, I will source some 4.3 centres and make the switch |
|
| Author: | Jezza86 [ Thu Feb 18, 2016 2:36 pm ] |
| Post subject: | Re: 4.3 diffs in 98 Jimny |
i have a full housing and 4.3 diff for sale FYI. and a full float and disk conversion kit. viewtopic.php?f=7&t=51372 |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|