| auszookers.com https://auszookers.com/forum/ |
|
| G16B fan shroud?? https://auszookers.com/forum/viewtopic.php?f=37&t=53405 |
Page 1 of 1 |
| Author: | Angus Martin [ Thu Oct 20, 2016 8:48 pm ] |
| Post subject: | G16B fan shroud?? |
G'day guys, I'm running a baleno 1.6 in my sierra with a vitara viscous hub fan and vitara powersteering. It currently has an aftermarket aluminium radiator and no fan shroud. I'd like to run a shroud but doesn't look like there's gonna be room for the stock sierra shroud as the fan is too big. What have those running the vitara fan used? Thanks |
|
| Author: | Gwagensteve [ Thu Oct 20, 2016 9:06 pm ] |
| Post subject: | Re: G16B fan shroud?? |
Vitara fan fits in the Sierra shroud |
|
| Author: | MrRocky [ Thu Oct 20, 2016 9:11 pm ] |
| Post subject: | Re: G16B fan shroud?? |
Yup fits but you may have to trim a tiny bit to clear the multirib baleno crank pulley |
|
| Author: | Angus Martin [ Thu Oct 20, 2016 9:18 pm ] |
| Post subject: | Re: G16B fan shroud?? |
Alright cheers guys, I'll have to grab one |
|
| Author: | Blkfxx [ Thu Oct 20, 2016 9:23 pm ] |
| Post subject: | Re: G16B fan shroud?? |
I had to trim my shroud and modify the drivers side rad bracket to be able to move the shroud over enough so the fan didn't touch it. That's with the ~20mm spacer that comes with BenT's vitara P/S kit. |
|
| Author: | Angus Martin [ Sat Oct 22, 2016 9:57 pm ] |
| Post subject: | Re: G16B fan shroud?? |
Easy done |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|