auszookers.com
https://auszookers.com/forum/

1990 to 1994 exhaust system swap
https://auszookers.com/forum/viewtopic.php?f=37&t=53901
Page 1 of 1

Author:  IIZEROXII [ Wed Feb 15, 2017 11:06 am ]
Post subject:  1990 to 1994 exhaust system swap

Hey any help would be appreciated I have a 1990 vitara with G16B motor and brand new extractors and exhaust system can i put the exhaust system on to a 1994 vitara with a G16A motor

Author:  Gwagensteve [ Wed Feb 15, 2017 11:28 am ]
Post subject:  Re: 1990 to 1994 exhaust system swap

Extractors will not fit.
The rest of the exhaust will be close enough to fit I reckon.

Author:  jdk81 [ Wed Feb 15, 2017 12:09 pm ]
Post subject:  Re: 1990 to 1994 exhaust system swap

As above, extractors wont fit.
The LWB piping and muffler etc probably wont fit the SWB without some modification

Author:  Gwagensteve [ Wed Feb 15, 2017 12:12 pm ]
Post subject:  Re: 1990 to 1994 exhaust system swap

Oh good pickup that a 1990 G16b will be LWB.
Hang on though, wasn't 1991 the first year of the LWB?

Author:  jdk81 [ Wed Feb 15, 2017 12:19 pm ]
Post subject:  Re: 1990 to 1994 exhaust system swap

Just guessing.
Could be a late 90 manu, but 91 compliance.

More info would be very useful.

Author:  IIZEROXII [ Wed Feb 15, 2017 3:11 pm ]
Post subject:  Re: 1990 to 1994 exhaust system swap

Thanks very much guys shames that the extractors won't fit

Author:  IIZEROXII [ Wed Feb 15, 2017 8:04 pm ]
Post subject:  Re: 1990 to 1994 exhaust system swap

They are both SWB and what other information would you like?

Author:  Gwagensteve [ Thu Feb 16, 2017 6:24 am ]
Post subject:  Re: 1990 to 1994 exhaust system swap

So the G16b must have been swapped in at some point. G16b's didn't exist in 1990.

Regardless, it doesn't change the answer. Extractors won't fit, exhaust mostly will.

Author:  IIZEROXII [ Thu Feb 16, 2017 1:47 pm ]
Post subject:  Re: 1990 to 1994 exhaust system swap

Ok so how can I check what motor is in the car because the both look the same to me?

Author:  Gwagensteve [ Thu Feb 16, 2017 2:03 pm ]
Post subject:  Re: 1990 to 1994 exhaust system swap

Now we're all confused. G16B is a 16 valve motor with an alloy rocker cover with 16valve cast into it.

The engine is fuel injected.

There are some g16a's which are the same.

Most g16a's (like 99.99999%) are 8v carby and have a plain black steel rocker cover.

Author:  IIZEROXII [ Thu Feb 16, 2017 3:47 pm ]
Post subject:  Re: 1990 to 1994 exhaust system swap

Well then it would appear they are both the same engine cause they both have a carbi

Author:  jdk81 [ Thu Feb 16, 2017 4:08 pm ]
Post subject:  Re: 1990 to 1994 exhaust system swap

well the exhaust will swap over then

Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/