| auszookers.com https://auszookers.com/forum/ |
|
| EFS Lift Kit with Genuine 4x4 bullbar https://auszookers.com/forum/viewtopic.php?f=37&t=54107 |
Page 1 of 1 |
| Author: | Jezdawg [ Tue Apr 04, 2017 8:26 pm ] |
| Post subject: | EFS Lift Kit with Genuine 4x4 bullbar |
Hi Guys, I know the topic of lifts has been done to death and I have read just about every thread I can find but still a bit unsure. Basically I was wondering if people find their EFS 2 inch kits to be more comfortable on road than stock along with any general comments about comfort. I am tossing up between OME and EFS but if EFS is noticably more comfortable than stock on asphalt and dirt roads then I will probably just go for EFS as they are a fair bit cheaper. As an aside I am wondering about how people find the EFS with HD springs. I have been looking at the Genuine 4x4 Bullbar so I think I will need uprated springs on the front. I will be using the jimny as a daily drive and monthly camping trips, two up with the rear full with eskies spearfishing gear etc. The bullbar weighs 39 Kg. Spring options are 0-30Kg or 0-70Kg (HD) front and 100Kg or 150 Kg (HD) constant load rear. So my guess is I would get uprated 0-70Kg front and standard 100Kg rear...? In case its relevant I will be running 215/75r 15 BFG All terrains. Sorry for the long noob post and thanks to anyone willing to give their 2 cents. Cheers, |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|