| auszookers.com https://auszookers.com/forum/ |
|
| transfer mount https://auszookers.com/forum/viewtopic.php?f=37&t=54173 |
Page 1 of 1 |
| Author: | cairns27 [ Mon Apr 24, 2017 10:04 am ] |
| Post subject: | transfer mount |
Just fell into a bit of a washout taking a pump down to the creek, and it started clunking. Please tell me I can just put a bolt through it..gotta go out for a while so will just twitch it for now. tar bye |
|
| Author: | BlueSuzy [ Mon Apr 24, 2017 2:14 pm ] |
| Post subject: | Re: transfer mount |
bolt/ratchet strap, Even a new mount would help bYe |
|
| Author: | greenzook89 [ Mon Apr 24, 2017 3:20 pm ] |
| Post subject: | Re: transfer mount |
+1 on new mount. Bye |
|
| Author: | bumstein [ Mon Apr 24, 2017 3:25 pm ] |
| Post subject: | Re: transfer mount |
What's happened to the mount? Has it snapped? Is it the bracket or the rubber mount? On one of my old jalopys I got away with no mount for a while. But it's not ideal. Get one as soon as you can |
|
| Author: | bumstein [ Mon Apr 24, 2017 3:26 pm ] |
| Post subject: | Re: transfer mount |
What's happened to the mount? Has it snapped? Is it the bracket or the rubber mount? On one of my old jalopys I got away with no mount for a while. But it's not ideal. Get one as soon as you can |
|
| Author: | cairns27 [ Mon Apr 24, 2017 4:30 pm ] |
| Post subject: | Re: transfer mount |
Yeah I'll mainly park up till I get a new one. It was the LHS one with steel glued to the rubber. thanks bye |
|
| Author: | cairns27 [ Fri Apr 28, 2017 5:42 pm ] |
| Post subject: | Re: transfer mount |
I got a new t'fer mount from FNQ Filters and Spares in Mareeba, part Transgold TEM0235, and the studs were 3 or4 ml longer. I was about to get a knife blade to it, and decided to get a hammer first, and it went in. Will be a drama replacing it next time, I wish now I had cut the studs. bye |
|
| Author: | Gwagensteve [ Fri Apr 28, 2017 5:44 pm ] |
| Post subject: | Re: transfer mount |
Which you will need to in 5...4...3.... Only genuine Bridgestone mounts last. |
|
| Author: | cairns27 [ Fri Apr 28, 2017 5:47 pm ] |
| Post subject: | Re: transfer mount |
It cost $38.00, I's only the second time I've broken it in ten years. bye |
|
| Author: | Gwagensteve [ Fri Apr 28, 2017 6:22 pm ] |
| Post subject: | Re: transfer mount |
So the other mounts are also non genuine? |
|
| Author: | cairns27 [ Sat Apr 29, 2017 6:23 am ] |
| Post subject: | Re: transfer mount |
Can't remember, but a friend rebuilt the t'fer box for a few years ago. Des at Briktec motors on Supply Road, Edmonton, has also looked at it. The handbrake drum almost touches the chasis. Neither thought the bracket was bent, and it has not vibration. Des is the Suzisport agent, and does know a lot about Suzukis bye |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|