| auszookers.com https://auszookers.com/forum/ |
|
| Noob - restoring an LJ80V in S.E Melb https://auszookers.com/forum/viewtopic.php?f=37&t=55131 |
Page 1 of 1 |
| Author: | Aircobra101 [ Wed Apr 18, 2018 7:55 pm ] |
| Post subject: | Noob - restoring an LJ80V in S.E Melb |
Hello all, Just joined the board, have recently bought a non-going mchine from country Vic so I thought I wld give everyone a peek All parts donations and advice welcome So the story begins 1. The car was bought as non-goer and trailered back. The reason why I made the purchase is because of the totally rust free body and chassis. The Nippon god has smiled on this unit!! 2. While the engine was a non runner, it was all good inside, with bores, cams, head all OK 3. The rest is pretty much downhill a. the transfer box has 2 stuffed bearings and mid shaft b. all the axle bearings are gone c. one of the diff bearings is gone d. all the brakes are RS ... keep watching for fots |
|
| Author: | bumstein [ Thu Apr 19, 2018 10:13 am ] |
| Post subject: | Re: Noob - restoring an LJ80V in S.E Melb |
I’d rather play with drive train than a stuffed body!!! Sounds like an absolute gem.. welcome to AZ, can’t wait to see your new steed |
|
| Author: | Aircobra101 [ Thu Apr 19, 2018 11:50 am ] |
| Post subject: | Re: Noob - restoring an LJ80V in S.E Melb |
some shots of the body https://www.flickr.com/photos/62957688@N08/40644385265/in/album-72157665897360077/ https://www.flickr.com/photos/62957688@N08/39728563450/in/album-72157665897360077/ https://www.flickr.com/photos/62957688@N08/26668825547/in/album-72157665897360077/ https://www.flickr.com/photos/62957688@N08/40825580964/in/album-72157665897360077/ |
|
| Author: | Aircobra101 [ Thu Apr 19, 2018 11:53 am ] |
| Post subject: | Re: Noob - restoring an LJ80V in S.E Melb |
and here are the problems 1. DOES ANYONE KNOW HOW TO UNDO THE BIG NUT https://www.flickr.com/photos/62957688@N08/27667615528/in/album-72157665897360077/ 2. THIS HAS THE WRONG INSIDES- WHERE TO GET REPLACEMENTS PARTS? https://www.flickr.com/photos/62957688@N08/41496700642/in/album-72157665897360077/ |
|
| Author: | bumstein [ Thu Apr 19, 2018 6:04 pm ] |
| Post subject: | Re: Noob - restoring an LJ80V in S.E Melb |
Bugger! Can’t assess any of the pics.. |
|
| Author: | sideways [ Thu Apr 19, 2018 7:57 pm ] |
| Post subject: | Re: Noob - restoring an LJ80V in S.E Melb |
Pics work for me? That's crazy neat for an old LJ! Shame about the hacked up roof! |
|
| Author: | bumstein [ Thu Apr 19, 2018 8:12 pm ] |
| Post subject: | Re: Noob - restoring an LJ80V in S.E Melb |
Doesn’t come up for me.. could be me, I’m not fond of technology.. no future in it I reckon |
|
| Author: | Technotron101 [ Thu Apr 19, 2018 8:39 pm ] |
| Post subject: | Re: Noob - restoring an LJ80V in S.E Melb |
Try a different browser perhaps? I'm using Chrome on Mac and I'm seeing them. Technology is a fickle beast |
|
| Author: | Aircobra101 [ Fri Apr 20, 2018 6:49 am ] |
| Post subject: | Re: Noob - restoring an LJ80V in S.E Melb |
try pasting the URL into your browser and that should work. It's just a link to a picture on flickr now, is there some expert who can help me can you see this? https://partsouq.com/en/catalog/genuine ... d=24792&q= |
|
| Author: | Aircobra101 [ Fri Apr 20, 2018 6:51 am ] |
| Post subject: | Re: Noob - restoring an LJ80V in S.E Melb |
and is there an expert on the board who knows where to get parts for the steering link arm aka steering relay? its parts #23-26 on the diagram |
|
| Author: | sideways [ Fri Apr 20, 2018 2:28 pm ] |
| Post subject: | Re: Noob - restoring an LJ80V in S.E Melb |
Is it a stockman or early LJ80? Stockmans have a different relay link bushings. People have pressed bearings in to replace the bushings. Suzuki still sell the large majority of serviceable parts on LJs. You can chase a local dealer price but megazip has been much cheaper for me, quicker too. All parts from megazip are genuine. https://www.megazip.net/zapchasti-dlya- ... nk-3795973 |
|
| Author: | Aircobra101 [ Fri Apr 20, 2018 8:29 pm ] |
| Post subject: | Re: Noob - restoring an LJ80V in S.E Melb |
yep, i need the shaft and the seals the shaft is US 190 holy toledo its a stockman and its got some some of a rubber bush pressed it. i thought it was a joke, are you telling me its genuine? https://www.flickr.com/photos/62957688@N08/41496700642/in/album-72157665897360077/ |
|
| Author: | Aircobra101 [ Fri Apr 20, 2018 8:43 pm ] |
| Post subject: | Re: Noob - restoring an LJ80V in S.E Melb |
and of course sweet f.a for the steering box parts does anyone know if the internals are interchangable with the sj140 box? i need a full set of bearings, seals and of course the worm shaft |
|
| Author: | Gwagensteve [ Fri Apr 20, 2018 9:38 pm ] |
| Post subject: | Re: Noob - restoring an LJ80V in S.E Melb |
Steering boxes are different and have no interchangeable or replaceable service parts. |
|
| Author: | Aircobra101 [ Sat Apr 21, 2018 9:58 pm ] |
| Post subject: | Re: Noob - restoring an LJ80V in S.E Melb |
Megazip only shows one type of steering link shaft |
|
| Author: | Aircobra101 [ Tue Apr 24, 2018 12:36 pm ] |
| Post subject: | Re: Noob - restoring an LJ80V in S.E Melb |
moved the thread to "members rigs". more progress there |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|