auszookers.com
https://auszookers.com/forum/

G13BA carby wires.
https://auszookers.com/forum/viewtopic.php?f=37&t=55384		 Page 1 of 1
Author:  worldo [ Sun Aug 19, 2018 2:14 pm ]
Post subject:  G13BA carby wires.
Can anyone help identify the following wires on this carby it’s different to my other 1.3 carby.

https://ibb.co/mZitiK
https://ibb.co/knEzOK
https://ibb.co/hWRqVz


Any help would be appreciated
Author:  bumstein [ Sun Aug 19, 2018 2:36 pm ]
Post subject:  G13BA carby wires.
What wires are on your previous carby?

G13BA have there’s wires. One is for idle up when the alternator is under load (for example when your headlights are on) the other is perhaps idle solenoid (not sure off the top of my head).

G13BA

Image

Image

Yours looks like some sort of mongrel or a similar carby off a different vehicle, they’ve tried to earth out that cap in the pic which aren’t on any stock Sierra carby that I’m aware of. Looks to me like an electric choke.

For reference G13A only have one wire and where you have that plastic cap (? Choke spring) both G13A and G13BA have a vacuum activated hoobajoob

G13A

Image
Author:  worldo [ Wed Aug 22, 2018 10:55 am ]
Post subject:  Re: G13BA carby wires.
Thanks for the reply I worked it out but dosnt idle very well.

Will be finding a better carby down the track
Author:  bumstein [ Wed Aug 22, 2018 2:47 pm ]
Post subject:  Re: G13BA carby wires.
4K Corolla carby is the way to go from what I read. Haven’t done the swap myself yet.
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/