| auszookers.com https://auszookers.com/forum/ |
|
| Does anyone know the history of this jimny in Perth? https://auszookers.com/forum/viewtopic.php?f=37&t=56084 |
Page 1 of 1 |
| Author: | teknoboi [ Sun Oct 20, 2019 8:57 am ] |
| Post subject: | Does anyone know the history of this jimny in Perth? |
Hey all had a look at the following jimny the other day. Had some suprised. Previous owner got it at an auction and doesnt know much about the car. Looks like it has air lockers of some kind. Hoses coming from transfer case and diffs. All 3 lines come up to this splitter pictures below. Winch that doesnt have a controller Random wiring too all around. Anyones old car or know the history and mods on it ?       
|
|
| Author: | fordem [ Tue Oct 22, 2019 1:09 am ] |
| Post subject: | Re: Does anyone know the history of this jimny in Perth? |
teknoboi wrote: Looks like it has air lockers of some kind. Hoses coming from transfer case and diffs. All 3 lines come up to this splitter pictures below. You're not that lucky - those are extended breathers |
|
| Author: | teknoboi [ Tue Oct 22, 2019 6:25 am ] |
| Post subject: | Re: Does anyone know the history of this jimny in Perth? |
Initially I thought that but all 3 hoses came to a blocked end hencemy conclusion. Didnt look like a filter at all but probably needs further inspection |
|
| Author: | fordem [ Tue Oct 22, 2019 12:19 pm ] |
| Post subject: | Re: Does anyone know the history of this jimny in Perth? |
Look at the axle end of the yellow hose in the last picture - it's connected to the breather port - there is also reason for a locker air line to be run to the transfer case, and last but not least, whilst the top of the hose is somewhat obscured in the first picture, what I can see might be a sintered brass filter. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|