| auszookers.com https://auszookers.com/forum/ |
|
| Rear disc conversion https://auszookers.com/forum/viewtopic.php?f=37&t=56100 |
Page 1 of 1 |
| Author: | timmyd112 [ Wed Oct 30, 2019 4:05 pm ] |
| Post subject: | Rear disc conversion |
Hi, I purchased a holden drover 1987 which had a rear disc conversion. Now my pads are finally worn and I have no idea what brake pads will fit the rear discs. Wondering what are some common rear discs etc used in this conversion? I have already tried sierra front pads but they dont work. Any help would be great. Regards, Tim |
|
| Author: | markmo [ Wed Oct 30, 2019 4:41 pm ] |
| Post subject: | Re: Rear disc conversion |
A photo of the caliper might help. |
|
| Author: | MrRocky [ Thu Oct 31, 2019 8:10 am ] |
| Post subject: | Re: Rear disc conversion |
Some early/diy kits use mitsi galant, ea81/2 subaru |
|
| Author: | greyghost [ Thu Oct 31, 2019 2:43 pm ] |
| Post subject: | Re: Rear disc conversion |
pintara? |
|
| Author: | jdk81 [ Fri Nov 01, 2019 10:23 am ] |
| Post subject: | Re: Rear disc conversion |
is the number on the back of the pads visible? |
|
| Author: | timmyd112 [ Mon Nov 11, 2019 8:42 pm ] |
| Post subject: | Re: Rear disc conversion |
There is no brand or part number on the pads as it seems to have worn off. There is a number on the caliper but all the research I have done hasnt been able to find a specific pad or part number for the caliper and pads. My next point of call is to take a pad in to repco or even a brake specialst and see if they can figure it out. |
|
| Author: | bumstein [ Mon Nov 11, 2019 9:54 pm ] |
| Post subject: | Re: Rear disc conversion |
timmyd112 wrote: My next point of call is to take a pad in to repco or even a brake specialst and see if they can figure it out. Don’t bother with Repco, I’d go straight to a brake specialist |
|
| Author: | jdk81 [ Thu Nov 14, 2019 1:58 pm ] |
| Post subject: | Re: Rear disc conversion |
you can get a bendix brake parts list/brocure online with all the pics and dimensions etc |
|
| Author: | timmyd112 [ Sat Jan 04, 2020 7:25 am ] |
| Post subject: | Re: Rear disc conversion |
Hi guys, Update, I used the bendix catalouge online which was geat. Found out that the pad is the Vitara front pad. So heading to Autobahn to see if they have some avaliable to compare wih mine before I purchase. Thanks for the help. regards, Tim |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|