| auszookers.com https://auszookers.com/forum/ |
|
| SJ410 / LJ80 extractors https://auszookers.com/forum/viewtopic.php?f=37&t=56941 |
Page 1 of 1 |
| Author: | greenzook89 [ Mon Mar 15, 2021 8:01 am ] |
| Post subject: | SJ410 / LJ80 extractors |
OK Noob question here. Will a set of Ebay extractors for A SJ410 fit a LJ80 and vice versa? Thanks. |
|
| Author: | sideways [ Mon Mar 15, 2021 9:27 am ] |
| Post subject: | Re: SJ410 / LJ80 extractors |
I wouldn't try it unless I already had the extractors. SJ40 chassis are wider. The stock SJ40 exhaust manifold doesn't fit an LJ80 because it fouls the chassis. |
|
| Author: | greenzook89 [ Mon Mar 15, 2021 8:59 pm ] |
| Post subject: | Re: SJ410 / LJ80 extractors |
I have a set of extractors for the LJ that I am told are from an LJ. But they are a little old and Shitna needs a set as the manifold is crumbling into pieces. So I was hoping to put the old set on shitna and new set on the LJ. Not a big deal in the grand scheme of things but still. |
|
| Author: | MrRocky [ Tue Mar 16, 2021 10:19 pm ] |
| Post subject: | Re: SJ410 / LJ80 extractors |
I swapped extractors from maruti 1ltr lwb to lj80 800cc without issue. The ones i used were 4 into 1 from ebay not the more common wildcat type 4 into 2 into 1 |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|