auszookers.com • View topic - Reverse difficult to select when articulating

Board index » Talking About Stuff » Suzuki Talk

Reverse difficult to select when articulating

Page 1 of 1

[ 11 posts ]

Print view

Previous topic | Next topic

Author

Message

Bugsta

Joined: Fri Oct 30, 2009 10:30 pm
Posts: 1754
Location: North Brisbane

Posted: Thu Nov 12, 2009 3:36 am

I have been having trouble selecting some gears on my 08 Jim. Mostly reverse when I am articulating or at least not on a flat surface.

This problem seems only slightly worse now that I have added a 50mm body lift kit. What can I do to rectify this?

_________________
If you can read this, please tip me back over

steak_knife

az supporter

Joined: Fri May 22, 2009 11:30 pm
Posts: 21335
Location: Smart Ass Island

Posted: Thu Nov 12, 2009 3:39 am

How many km's has it done?

_________________
I used to be indecisive,
now I'm not so sure.....

lump_a_charcoal

az supporter

Joined: Wed Feb 28, 2007 10:30 pm
Posts: 4454
Location: Botany, NSW
Vehicle: MY2019 Jimny

Posted: Thu Nov 12, 2009 4:07 am

Make sure the gearstick isn't hitting the edge of the floor cutout.

Bugsta

Joined: Fri Oct 30, 2009 10:30 pm
Posts: 1754
Location: North Brisbane

Posted: Thu Nov 12, 2009 4:18 am

When I first had the problem, it had done about 200km's. AT this point, I had only added the 235's and 50mm King springs from Suzisport.

Quote:

Make sure the gearstick isn't hitting the edge of the floor cutout.

And yes, I thought this a possibility but as mentioned - happened from new before body lift.

_________________
If you can read this, please tip me back over

lump_a_charcoal

az supporter

Joined: Wed Feb 28, 2007 10:30 pm
Posts: 4454
Location: Botany, NSW
Vehicle: MY2019 Jimny

Posted: Thu Nov 12, 2009 4:23 am

Have you checked to see if it is hitting though?
It could be a busted mount or something.

Bugsta

Joined: Fri Oct 30, 2009 10:30 pm
Posts: 1754
Location: North Brisbane

Posted: Thu Nov 12, 2009 4:25 am

Well I did actually check on level ground one day, and all seems to be in order. No undue movement.

On flat surface, it is no problem.

_________________
If you can read this, please tip me back over

SuperRoo

Joined: Wed Apr 16, 2008 11:30 pm
Posts: 86
Location: Perth WA

Posted: Thu Nov 12, 2009 8:30 am

lump_a_charcoal wrote:

It could be a busted mount

What he said ^^^^^^

Have you checked your engine mounts, transfer mount, all of them?

Reubs

Joined: Wed Sep 09, 2009 11:30 pm
Posts: 1522
Location: Brisbane
Vehicle: SJ80, SE416

Posted: Thu Nov 12, 2009 2:37 pm

Didn't you say you rolled your car the day after you got it? My bet would be the g/box mount or the g/box crossmember is bent.

joeblow

Joined: Sat May 10, 2008 11:30 pm
Posts: 3273
Location: melbourne

Posted: Thu Nov 12, 2009 2:44 pm

Bugsta wrote:

This problem seems only slightly worse now that I have added a 50mm body lift kit. What can I do to rectify this?

is it a good quality body lift kit? sounds to me there is too much movement in relation to the chassis and body. also it may be clearing the hole in the floor, but is the rubber boot putting too much pressure on it also?

_________________
builder of custom road legal zooks......and stuff.

Bugsta

Joined: Fri Oct 30, 2009 10:30 pm
Posts: 1754
Location: North Brisbane

Posted: Thu Nov 12, 2009 2:53 pm

Reubs: yeah good point. Will check that.

joeblow: Was happening before the body lift. What rubber boot?

I just cannot get it over to the right to get it into 4th or reverse when on any sort of angle, no matter how mild.

_________________
If you can read this, please tip me back over

lump_a_charcoal

az supporter

Joined: Wed Feb 28, 2007 10:30 pm
Posts: 4454
Location: Botany, NSW
Vehicle: MY2019 Jimny

Posted: Thu Nov 12, 2009 3:17 pm

Dude - Pull off the gear stick boot, flex it up and look. Pretty simple.

There is a rubber boot on top of the gearbox, under the gear stick boot.

I reckon your drivers side engine or gearbox mounts are rooted.

Page 1 of 1

[ 11 posts ]

Board index » Talking About Stuff » Suzuki Talk

Who is online

Users browsing this forum: No registered users and 141 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum