auszookers.com • View topic - help identify these springs

Board index » Talking About Stuff » Suzuki Talk

help identify these springs

Page 1 of 1

[ 22 posts ]

Print view

Previous topic | Next topic

Author

Message

eldo

az supporter

Joined: Sat May 30, 2009 11:30 pm
Posts: 2770
Location: sunny coast
Vehicle: jimny

Posted: Sun Apr 18, 2010 7:27 pm

i have some second hand springs i got for the lwb, im just trying to work out what brand they are. they have SUZ-01 and SUZ-02 on them in white painted capitals. any ideas guys?

eldo

az supporter

Joined: Sat May 30, 2009 11:30 pm
Posts: 2770
Location: sunny coast
Vehicle: jimny

Posted: Sun Apr 18, 2010 7:28 pm

they are meant to be a 2 inch lift as well

Junior_91

Joined: Tue Mar 17, 2009 10:30 pm
Posts: 1084
Location: Ipswich

Posted: Sun Apr 18, 2010 7:47 pm

Any pics?

_________________
TWIN LOCK IT & JUST DRIVE!

eldo

az supporter

Joined: Sat May 30, 2009 11:30 pm
Posts: 2770
Location: sunny coast
Vehicle: jimny

Posted: Sun Apr 18, 2010 8:03 pm

i can take some if you like but it really just says SUZ-01 etc

Junior_91

Joined: Tue Mar 17, 2009 10:30 pm
Posts: 1084
Location: Ipswich

Posted: Sun Apr 18, 2010 8:24 pm

My guess would be Efs mate. But normally they have their own sticker on them as well??

_________________
TWIN LOCK IT & JUST DRIVE!

MacDaddy

az supporter

Joined: Thu Mar 26, 2009 10:30 pm
Posts: 10453
Location: Perth, Australia
Vehicle: Jeep

Posted: Sun Apr 18, 2010 8:29 pm

Junior_91 wrote:

Any pics?

X 2

Need pics ! :wink:

SuziBlu

Joined: Mon Sep 14, 2009 11:30 pm
Posts: 4268
Location: Eyre Peninsula

Posted: Sun Apr 18, 2010 8:31 pm

I punched in SUZ-01 sierra springs into google, and up in the engine came King Springs with the models.

_________________
Bad decisions make good stories.

eldo

az supporter

Joined: Sat May 30, 2009 11:30 pm
Posts: 2770
Location: sunny coast
Vehicle: jimny

Posted: Sun Apr 18, 2010 8:45 pm

SuziBlu wrote:

I punched in SUZ-01 sierra springs into google, and up in the engine came King Springs with the models.

i did as well but then download the catalogue and the number is actually SUZ-011 for standards and no mention of the SUZ-02.
i also did the efs thing and all i could find was SUZ-02E

BUZOOKA

az supporter

Joined: Sun Aug 30, 2009 11:30 pm
Posts: 2659
Location: hobart tasmania

Posted: Sun Apr 18, 2010 8:57 pm

my ome ones have something similar to that on them in a yellow paint

_________________
-indebt 4x4 club-

nav 32s n winch cust rear

Joe

I live here!

Joined: Sat Jul 04, 2009 11:30 pm
Posts: 49041
Location: Rockingham W.A
Vehicle: JB74

Posted: Sun Apr 18, 2010 8:59 pm

I got some two inch lifted spring from TJM a few years ago that had suz01 printed on em in white i cant remember what brand TJM sells though :roll:

_________________
Joe likes boobs ( . )( . ) ( ° )( ° )

alex

az supporter

Joined: Sat Aug 16, 2008 11:30 pm
Posts: 2151
Location: Brissy
Vehicle: Nissan

Posted: Sun Apr 18, 2010 9:44 pm

proberly EFS

the EFS sticker is half under where the U bolts go but arfter a while they get riped off :roll:

_________________
Pearce-toff Racing

BlueSuzy

az supporter

Joined: Sun May 04, 2008 11:30 pm
Posts: 9716
Location: NSW
Vehicle: SJ51 LWB, SJ70 SWB

Posted: Mon Apr 19, 2010 12:17 am

King springs.

_________________

BlueSuzy wrote:

I'm over the G16b's.

Bruce

az supporter

Joined: Sun Jun 11, 2006 11:30 pm
Posts: 4003
Location: Brisbane

Posted: Mon Apr 19, 2010 12:19 am

Just call them Buttercup :-)

_________________
[quote="royce"] I wouldnt mind insulating my rear

BlueSuzy

az supporter

Joined: Sun May 04, 2008 11:30 pm
Posts: 9716
Location: NSW
Vehicle: SJ51 LWB, SJ70 SWB

Posted: Mon Apr 19, 2010 12:24 am

King springs are SUZ-001 to 011

Bottom of 1st page
http://www.kingsprings.com/catalogue/ki ... alogue.pdf

They also normally have a small square sticker. See if there is any sticky glue left

_________________

BlueSuzy wrote:

I'm over the G16b's.

Moph

az supporter

Joined: Sat May 19, 2007 11:30 pm
Posts: 2535
Location: Perth
Vehicle: 93 Sierra

Posted: Mon Apr 19, 2010 12:34 am

Seeing as the spring experts are in this thread ... anyone know what the + and () symbols on OME 2" lifted springs are? I took it to mean + driver's side and () passenger but still have about 15mm Sierra lean on the driver's side...

joeblow

Joined: Sat May 10, 2008 11:30 pm
Posts: 3273
Location: melbourne

Posted: Mon Apr 19, 2010 12:55 am

Moph wrote:

+ means its above manufacturing tolerance, i.e a beez penis higher.

- means they are a little lower.

if they don't have a - or a + they are spot on.

_________________
builder of custom road legal zooks......and stuff.

Moph

az supporter

Joined: Sat May 19, 2007 11:30 pm
Posts: 2535
Location: Perth
Vehicle: 93 Sierra

Posted: Mon Apr 19, 2010 1:01 am

Beaut - thanks Joe.

eldo

az supporter

Joined: Sat May 30, 2009 11:30 pm
Posts: 2770
Location: sunny coast
Vehicle: jimny

Posted: Mon Apr 19, 2010 1:15 am

BlueSuzy wrote:

King springs are SUZ-001 to 011

Bottom of 1st page
http://www.kingsprings.com/catalogue/ki ... alogue.pdf

They also normally have a small square sticker. See if there is any sticky glue left

i also looked at that and mine say SUZ-01 and SUZ-02 not 001 or 002. im gonna go take a picture, its true all posts need pics

eldo

az supporter

Joined: Sat May 30, 2009 11:30 pm
Posts: 2770
Location: sunny coast
Vehicle: jimny

Posted: Mon Apr 19, 2010 1:31 am

ok so im smokin crack and i should pay more attention, they say SUZI-01 and SUZI-02 which is these
http://www.4x4.net.au/products/partView.php?Table=LSp

so i guess now i will go check what they are

eldo

az supporter

Joined: Sat May 30, 2009 11:30 pm
Posts: 2770
Location: sunny coast
Vehicle: jimny

Posted: Mon Apr 19, 2010 1:34 am

eldo

az supporter

Joined: Sat May 30, 2009 11:30 pm
Posts: 2770
Location: sunny coast
Vehicle: jimny

Posted: Mon Apr 19, 2010 1:40 am

so what i worked out so far is the SUZI-02 are direct supsensions or EFS springs for constant 120kg in 2 inch. i cant seem to find the SUZI-01 info though

BlueSuzy

az supporter

Joined: Sun May 04, 2008 11:30 pm
Posts: 9716
Location: NSW
Vehicle: SJ51 LWB, SJ70 SWB

Posted: Mon Apr 19, 2010 2:08 am

Not kings.

Kings do not have military wrap or bolt rear retainers.

_________________

BlueSuzy wrote:

I'm over the G16b's.

Page 1 of 1

[ 22 posts ]

Board index » Talking About Stuff » Suzuki Talk

Who is online

Users browsing this forum: Google [Bot] and 463 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum