auszookers.com • View topic - biggest offset rims (off the shelf)

Board index » Talking About Stuff » Suzuki Talk

biggest offset rims (off the shelf)

Page 1 of 1

[ 27 posts ]

Print view

Previous topic | Next topic

Author

Message

mika

Joined: Mon Aug 03, 2009 11:30 pm
Posts: 351
Vehicle: Sierra

Posted: Tue May 04, 2010 8:14 am

looking for some 15x8 or 15x7 offset rims for my sierra. i'm after the biggest offset without cutting and flipping. I believe -30 might be the biggest? any recommended brands that have this much offset or more? They will be turned into beadlocks so i don't want to flip them
Cheers mika

steak_knife

az supporter

Joined: Fri May 22, 2009 11:30 pm
Posts: 21335
Location: Smart Ass Island

Posted: Tue May 04, 2010 8:38 am

Tell em it's a 82 F100 4x4, most tyre shop's won't sell rim's with a huge off set if thay know thay will be bolted onto a zook.

15x8 -25. bigest off shelf in OZ as far as I know

_________________
I used to be indecisive,
now I'm not so sure.....

mika

Joined: Mon Aug 03, 2009 11:30 pm
Posts: 351
Vehicle: Sierra

Posted: Tue May 04, 2010 8:46 am

thanks for the tip.
i would have thought you could get a little more than -25?

steak_knife

az supporter

Joined: Fri May 22, 2009 11:30 pm
Posts: 21335
Location: Smart Ass Island

Posted: Tue May 04, 2010 8:52 am

mika wrote:

thanks for the tip.
i would have thought you could get a little more than -25?

I could be wrong, That happen's from time to time. :roll:

_________________
I used to be indecisive,
now I'm not so sure.....

mika

Joined: Mon Aug 03, 2009 11:30 pm
Posts: 351
Vehicle: Sierra

Posted: Tue May 04, 2010 8:54 am

steknig wrote:

mika wrote:

thanks for the tip.
i would have thought you could get a little more than -25?

I could be wrong, That happen's from time to time. :roll:

or i could be wrong, that happen's pretty much all the time :lol:

ZookiMonsta

Joined: Sun Aug 23, 2009 11:30 pm
Posts: 1625
Location: Jimboomba

Posted: Tue May 04, 2010 9:00 am

I know a guy that got -44 for his troll. But they were
15x10. :roll:

_________________
Own a weird looking coily sh!tbox!

flaxton123

Joined: Tue Feb 02, 2010 10:30 pm
Posts: 121
Location: queensland

Posted: Tue May 04, 2010 9:10 am

ZookiMonsta wrote:

I know a guy that got -44 for his troll. But they were
15x10. :roll:

and the wrong stud pattern :wink:

ajsr

az supporter

Joined: Sun Dec 28, 2008 10:30 pm
Posts: 3712
Location: melb

Posted: Tue May 04, 2010 9:11 am

i think cj jeep rims are a larger offset than f100 by about 20mm

ZookiMonsta

Joined: Sun Aug 23, 2009 11:30 pm
Posts: 1625
Location: Jimboomba

Posted: Tue May 04, 2010 9:11 am

flaxton123 wrote:

ZookiMonsta wrote:

I know a guy that got -44 for his troll. But they were
15x10. :roll:

and the wrong stud pattern :wink:

You can buy adapters. :roll:

_________________
Own a weird looking coily sh!tbox!

bogfrog

az supporter

Joined: Mon Dec 29, 2008 10:30 pm
Posts: 596
Location: Mt Evelyn Vic

Posted: Tue May 04, 2010 9:20 am

-28 are usually an off the shelf item in a 15x8.

_________________
Bitumen...Another waste of public funds!

royce

omnipotent being

Joined: Sun Jun 11, 2006 11:30 pm
Posts: 17216
Location: Pluto

Posted: Tue May 04, 2010 9:23 am

bogfrog wrote:

-28 are usually an off the shelf item in a 15x8.

best I know of for speedys and the like, unless you go to 10"

mika

Joined: Mon Aug 03, 2009 11:30 pm
Posts: 351
Vehicle: Sierra

Posted: Tue May 04, 2010 9:39 am

thanks guys, i'll look into the cj jeep rims otherwise i might have to be happy with -28

eldo

az supporter

Joined: Sat May 30, 2009 11:30 pm
Posts: 2770
Location: sunny coast
Vehicle: jimny

Posted: Tue May 04, 2010 9:42 am

Try the states they will have larger off sets

Ben_Sierra

az supporter

Joined: Wed Sep 30, 2009 11:30 pm
Posts: 4472
Location: Perth

Posted: Tue May 04, 2010 10:05 am

http://www.4wdaction.com.au/forum/f24/s ... res-88884/

_________________
I want my old sig back

mika

Joined: Mon Aug 03, 2009 11:30 pm
Posts: 351
Vehicle: Sierra

Posted: Tue May 04, 2010 10:27 am

eldo wrote:

Try the states they will have larger off sets

only prob might be postage

mika

Joined: Mon Aug 03, 2009 11:30 pm
Posts: 351
Vehicle: Sierra

Posted: Tue May 04, 2010 10:31 am

Ben_Sierra wrote:

http://www.4wdaction.com.au/forum/f24/suzuki-f100-sunraiser-15%22x10%22-rims-tyres-88884/

man that's too much offset!

and too wide but nice find

only after -30 or possibly a little more
thinking about it -28 should be fine!

BlueSuzy

az supporter

Joined: Sun May 04, 2008 11:30 pm
Posts: 9716
Location: NSW
Vehicle: SJ51 LWB, SJ70 SWB

Posted: Tue May 04, 2010 10:25 pm

mika wrote:

Ben_Sierra wrote:

http://www.4wdaction.com.au/forum/f24/suzuki-f100-sunraiser-15%22x10%22-rims-tyres-88884/

man that's too much offset!

and too wide but nice find

only after -30 or possibly a little more
thinking about it -28 should be fine!

King wheels do a -28 15x8 For a F100/Suzuki stud pattern
Speedy don't do them anymore.

I have the King -28's.

Its the biggest offset on shelf for $60-$100 each. Then there is rims made to suit your order. $100++++

_________________

BlueSuzy wrote:

I'm over the G16b's.

mika

Joined: Mon Aug 03, 2009 11:30 pm
Posts: 351
Vehicle: Sierra

Posted: Wed May 05, 2010 6:23 am

cheers mate, do you get any scrubbing on springs with 33's or did you have to adjust steering stops?

rpmwrx

az supporter

Joined: Sat Jul 19, 2008 11:30 pm
Posts: 1303
Location: Geelong
Vehicle: JK Jeep, Sierra & Raptor

Posted: Wed May 05, 2010 6:55 am

Procomp Rockcrawler rims... 5 x 5.5

biggest offset on a 15 x 7 rim is -38
biggest offset on a 15 x 8 rim is -50

these would suit beadlocks too...

http://www.procomp.com.au/Default.asp?MenuId=WHEEL_0052

the rims i'm running on my zook are eagle alloys 15 x 8 -30 offset, but they are around $300 each... go the rockcrawlers for sure...

mudzookacoatsy

Joined: Fri Jul 31, 2009 11:30 pm
Posts: 380
Location: ipswich

Posted: Wed May 05, 2010 7:44 am

umm try speedy, roh, dynamic, kings wheels csa

_________________
2''lift 31's twin locked & 6.5s

mika

Joined: Mon Aug 03, 2009 11:30 pm
Posts: 351
Vehicle: Sierra

Posted: Wed May 05, 2010 9:40 am

thanks guys
RPMWRX thanks, why didn't i think of procomp :oops:

mcwilly

Joined: Sun Sep 21, 2008 11:30 pm
Posts: 867
Location: nsw, newcastle

Posted: Wed May 05, 2010 1:06 pm

I have the pro comp -50 on mine they are ok I wanna go wider but

_________________
1996 sierra + 2" body lift + SPOA conversion + ome

Bucket

az supporter

Joined: Mon Nov 30, 2009 10:30 pm
Posts: 2191
Location: Vic
Vehicle: SJ50 hardtop!

Posted: Wed May 05, 2010 1:33 pm

mcwilly wrote:

I have the pro comp -50 on mine they are ok I wanna go wider but

Could you throw up a pic or 2 in this thread of said rims? Looking for a set of deep dish rims myself.

EDIT: I read your buildup. Are they the 15x8's? How much were they worth?

_________________
NT SJ50

BlueSuzy

az supporter

Joined: Sun May 04, 2008 11:30 pm
Posts: 9716
Location: NSW
Vehicle: SJ51 LWB, SJ70 SWB

Posted: Wed May 05, 2010 10:19 pm

mika wrote:

cheers mate, do you get any scrubbing on springs with 33's or did you have to adjust steering stops?

Yes they 'touch' the springs because of 12.5's. But not enough to stop them turning.

_________________

BlueSuzy wrote:

I'm over the G16b's.

mika

Joined: Mon Aug 03, 2009 11:30 pm
Posts: 351
Vehicle: Sierra

Posted: Thu May 06, 2010 9:49 am

thanks guys, i think i'll be looking at the pro comps.

mcwilly

Joined: Sun Sep 21, 2008 11:30 pm
Posts: 867
Location: nsw, newcastle

Posted: Thu May 06, 2010 1:20 pm

Pro comps were approx 100 a wheel I think. They are pretty good wheels nice and strong and run true

_________________
1996 sierra + 2" body lift + SPOA conversion + ome

squirezook

Joined: Wed Aug 27, 2008 11:30 pm
Posts: 300
Location: Brisbane southside

Posted: Sat May 22, 2010 3:59 am

I have a set of 15x8 Mangels -30 came off a f100 there around if you have a look.

_________________
98 GV

Page 1 of 1

[ 27 posts ]

Board index » Talking About Stuff » Suzuki Talk

Who is online

Users browsing this forum: Google [Bot] and 297 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum