| Author |
Message |
CairnsZook

az supporter
Joined: Tue Jul 18, 2006 11:30 pm Posts: 872 Location: West Coast
Vehicle: Zookless
|
 Posted: Fri Jan 25, 2008 11:27 pm |
|
Both of my rear drums have started to weep brake fluid.
Both are very slow, as in, no noticable drop in the brake fluid reservoir, so hopefully I have a little time to fix the problem.
Unfortunately I do not have much experience with brakes at all. From the pics, can you guys tell what the problem could be, and if so what replacement parts it would require?
You do not have the required permissions to view the files attached to this post.
|
|
|
|
 |
Ashley
Joined: Sun Mar 04, 2007 10:30 pm Posts: 299 Location: Ballarat
|
 Posted: Sat Jan 26, 2008 1:14 am |
|
|
diff oil is my guess. looks like you might need some new seals.
_________________ [IMG]http://img.photobucket.com/albums/v711/richmo
|
|
|
|
 |
pete152
Joined: Wed Dec 26, 2007 10:30 pm Posts: 29 Location: Brisbane/Warwick
|
 Posted: Mon Jan 28, 2008 10:56 pm |
|
|
No I would pull the wheels and drums off and look at the wheel cylinders. They are about $40 each from repco. But check that the brake shoes are ok or just replace them at the same time, for a 1984 model they are around $35 for a rear set.
Cheers,
Peter
|
|
|
|
 |
steve

I live here!
Joined: Sun Jun 11, 2006 11:30 pm Posts: 7681 Location: Brisbane
Vehicle: 75 Cruiser
|
 Posted: Mon Jan 28, 2008 11:44 pm |
|
pete152 wrote: No I would pull the wheels and drums off and look
yeah give that a go first.
1. leave the wheel on
2. undo the 4 hub nuts
3. take the handbrake off
4. kick the tyre , left side, then right side til the wheel moves loose on the hub nuts and then remove the wheel with the hub attached.
see if the fluid is coming out the ends of the brake cylinder
|
|
|
|
 |
royce

omnipotent being
Joined: Sun Jun 11, 2006 11:30 pm Posts: 17216 Location: Pluto
|
 Posted: Tue Jan 29, 2008 1:02 am |
|
|
if you can see fluid on the backing plate its all stuffed inside anyways from contamination I'm afraid
youll need some brake shoes, I would replace the cylinders leaking or not (I would say thats what it leaking anyway) and give it all a good clean
they arent hard if you do one side at a time so you can use the other side as a reference but if you arent sure dont risk it and take it to a mechanic
|
|
|
|
 |
Scrawny

I live here!
Joined: Tue Jan 29, 2008 10:30 pm Posts: 10528 Location: Brissie
Vehicle: Popemobile
|
 Posted: Fri Feb 01, 2008 7:58 pm |
|
|
What happened with this one?
My guess was diff oil too, I haven't come across brake fluid leaking on the back of the backing plate unless the brake pipe has come loose, been left loose or fractured. Wheel cylinders normally just make a mess inside the drum and leak out the bottom eventually.
|
|
|
|
 |
CairnsZook

az supporter
Joined: Tue Jul 18, 2006 11:30 pm Posts: 872 Location: West Coast
Vehicle: Zookless
|
 Posted: Sat Feb 02, 2008 10:22 pm |
|
Here's the result.
Brake fluid AND diff oil.
Looks like I'm up for a slightly bigger job than expected.
|
|
|
|
 |
3cyl
Joined: Tue Jan 29, 2008 10:30 pm Posts: 2054 Location: Ipswich
|
 Posted: Sun Feb 03, 2008 1:59 am |
|
|
No biggie, just check your wheel bearings while you're at it,sometimes flogged out wheel bearings can cause the seal to leak, that's a bigtime leak! But hey parts are cheap.
_________________ awesome only comes in 2 colours, camo & bare metal
|
|
|
|
 |
|