auszookers.com • View topic - engine conversion

Board index » Talking About Stuff » Suzuki Talk

engine conversion

Page 1 of 1

[ 13 posts ]

Print view

Previous topic | Next topic

Author

Message

russty_2008

Joined: Thu Nov 26, 2009 10:30 pm
Posts: 435
Location: Gladstone QLD
Vehicle: G16b 83

Posted: Tue Feb 15, 2011 9:30 am

where is the best and cheapest place to get an adaptor plate from

89_tintop

az supporter

Joined: Fri Aug 07, 2009 11:30 pm
Posts: 3159
Location: gold coast

Posted: Tue Feb 15, 2011 9:31 am

right hear

http://auszookers.com/index.php?name=Fo ... ic&t=15009

_________________
http://auszookers.com/index.php?name=Forums&file=v

xedent

az supporter

Joined: Mon Jun 15, 2009 11:30 pm
Posts: 895
Location: Sunshine Coast, QLD
Vehicle: LWB Maruthi on WT Diffs!

Posted: Tue Feb 15, 2011 9:35 am

BEN T

_________________
My Maruti build, Click WWW

steak_knife

az supporter

Joined: Fri May 22, 2009 11:30 pm
Posts: 21335
Location: Smart Ass Island

Posted: Tue Feb 15, 2011 9:44 am

xedent wrote:

BEN T

Yep, get BEN T..

_________________
I used to be indecisive,
now I'm not so sure.....

russty_2008

Joined: Thu Nov 26, 2009 10:30 pm
Posts: 435
Location: Gladstone QLD
Vehicle: G16b 83

Posted: Tue Feb 15, 2011 7:03 pm

so im picking up a baleno this weekend, will i have to get another clutch or can i use the baleno one ???

mondo

Joined: Wed Dec 29, 2010 10:18 pm
Posts: 481
Location: Jimboomba

Posted: Tue Feb 15, 2011 7:52 pm

is this a conversion for a sierra?

want33s

az supporter

Joined: Fri Nov 16, 2007 10:30 pm
Posts: 8134
Location: Sunshine Coast Qld

Posted: Tue Feb 15, 2011 7:57 pm

Use Sierra flywheel, clutch and pressure plate....

You found one pretty quick

want33s

az supporter

Joined: Fri Nov 16, 2007 10:30 pm
Posts: 8134
Location: Sunshine Coast Qld

Posted: Tue Feb 15, 2011 8:07 pm

BenT kit is fine if you are fitting a Vitara motor but Russty states in another thread he's using a Baleno...

I would use Petroworks kit as it includes full engine mounts.

russty_2008

Joined: Thu Nov 26, 2009 10:30 pm
Posts: 435
Location: Gladstone QLD
Vehicle: G16b 83

Posted: Tue Feb 15, 2011 8:31 pm

yer cheap to can u think of anything else i will need

want33s

az supporter

Joined: Fri Nov 16, 2007 10:30 pm
Posts: 8134
Location: Sunshine Coast Qld

Posted: Tue Feb 15, 2011 9:22 pm

engine mounts...
Petroworks from Lowrange.

BlueSuzy

az supporter

Joined: Sun May 04, 2008 11:30 pm
Posts: 9716
Location: NSW
Vehicle: SJ51 LWB, SJ70 SWB

Posted: Tue Feb 15, 2011 9:36 pm

What is the difference between Baleno and Vit block? I've Never used a vit one only Twincoil Baleno..

Sierra cast engine mount holes were opened alittle to suit Baleno block, both holes in thin flat plates were moved (one slotted, one rebent so i could get a full new hole) so engine mounts sit nice and not twisted.

Stock Sierra box with stock Gbox mount.

Same adaptor should fit. Are the pins/bolts/location rings different?

I have also heard vits only need 1 flat plate mount modded, and some baleno motor people have only done 1 mount also.

Baleno motor can fit with no Bodylift, So lowering the motor like petroworks 'might' is not needed. (i havent looked yet)

AND carefully read through here, And if you click on the other link from outers, it will give you a list of items/mods you will need to do.
http://www.auszookers.com/index.php?nam ... 33&start=0
http://www.auszookers.com/index.php?nam ... pic&t=6423
http://forum.outerlimits4x4.com/viewtop ... lit=baleno

Since then^
I also used a 2L v6 vit airbox. and a camry airintake hose, Fit perfect. The 1L airbox was restricting.

Did you get ther twincoil pack model?

_________________

BlueSuzy wrote:

I'm over the G16b's.

Last edited by BlueSuzy on Tue Feb 15, 2011 10:07 pm, edited 1 time in total.

xedent

az supporter

Joined: Mon Jun 15, 2009 11:30 pm
Posts: 895
Location: Sunshine Coast, QLD
Vehicle: LWB Maruthi on WT Diffs!

Posted: Tue Feb 15, 2011 9:58 pm

Or Holden vl rb30 ones

And thermostat housing from early 1.3 swift

Fuel pump etc

Read through this

http://www.auszookers.com/index.php?nam ... pic&t=6423

What motor do you have now ? 1.3 or 1l

_________________
My Maruti build, Click WWW

BenT

az supporter

Joined: Sun Nov 16, 2008 10:30 pm
Posts: 208
Location: Nelson, NZ
Vehicle: 85 SJ413

Posted: Wed Feb 16, 2011 4:18 am

want33s wrote:

BenT kit is fine if you are fitting a Vitara motor but Russty states in another thread he's using a Baleno...

I would use Petroworks kit as it includes full engine mounts.

My kit works fine with a Baleno motor, and given they have a lower intake manifold, you don't need a body lift, or lowered engine mounts.

Ben

_________________
WWW.ZUKPARTS.COM - Quality Suzuki Off-road Parts

Page 1 of 1

[ 13 posts ]

Board index » Talking About Stuff » Suzuki Talk

Who is online

Users browsing this forum: Google [Bot] and 971 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum