[MG410]

I just bought a G16B from a damaged Baleno, what extra parts from Car are required for the transplant to Sierra/Maruti,also does anyone Make or have a design for the Water outlet at rear of Motor.
Thanks

[BlueSuzy]

Read here:
http://www.auszookers.com/index.php?nam ... 23&start=0

And here, because your engine mounts will be suited for a 1L(going by your username)
http://www.auszookers.com/index.php?nam ... 99&start=0

And here:
http://www.outerlimits4x4.com/viewtopic ... lit=Baleno

[MG410]

I already have G13ba fitted with 1.3 mounts and a Bent adapter,just got to remove all required parts from Baleno wreck this weekend.

[BlueSuzy]

MG410 wrote:

I already have G13ba fitted with 1.3 mounts and a Bent adapter,just got to remove all required parts from Baleno wreck this weekend.

Really just need the motor and all wiring(including the cluster if you want a stockish tacho if coilpack model)

Twin coil or dizzy?

[xedent]

If you already have 1.3 mounts it's pretty strait forward, just need motor, loom, cluster.

You will need a thermostat housing from an early swift, it's right angle.

You will need the 1.3 sump and pickup, you have to cut the piece from the bal sump where crank sensor is and weld to your sierra sump.

Should also get vl commodore rb30 engine mounts as these are way stronger.

Probably more but that's all I can think of the top of my head.

Good luck.

[BlueSuzy]

xedent wrote:

If you already have 1.3 mounts it's pretty strait forward, just need motor, loom, cluster.

You will need a thermostat housing from an early swift, it's right angle.

You will need the 1.3 sump and pickup, you have to cut the piece from the bal sump where crank sensor is and weld to your sierra sump.

Should also get vl commodore rb30 engine mounts as these are way stronger.

Probably more but that's all I can think of the top of my head.

Good luck.

check the links..

[matty87]

Take everything that dosent take up much room. Then ditch the body. You will be surprised at the usefulness of the parts.

[MG410]

Thanks all
Its the coil pack version [No Dizzy] and its up the Central Coast NSW,just making sure I dont leave anything behind that might be required.Been reading the 16B post just double checking.

[dp87]

http://i161.photobucket.com/albums/t218 ... omrear.jpg


is that what u need made up?

im after one too

[BlueSuzy]

Some people are able to use the stocko one with a swift housing on it.

I wasnt able to as my engine was closer to the firewall, and good luck changing the thermostat..

There is many threads on this already.

I have to make one again for my new one.

Should i make 3..

[dp87]

hey mate if you could get one made up for me that would be awesome. when are you thinking about doing it?

i havnt fitted my engine yet, im waiting to get my sump welded by fatzook. everything else is ready to go.

im pretty sure that i need something like that made up because i have 2inch bodylift and im using VL engine mounts

[MG410]

If you got time to make extra fitting I am interested,PM price
The motor I picking up is from 2000 Baleno manual

[Birdman1985]

Thanks alot!!!!!!!!

I was bidding on that! Pipped me on the last second.

[94BAZOOKA]

MG410 wrote:

If you got time to make extra fitting I am interested,PM price
The motor I picking up is from 2000 Baleno manual

I'll pick the motor up from lake munmorah and install it for you

In my car