[stockman]

I pulled my case apart the other day, but the countershaft was stuck. I removed the locking tab on the outside of the case but the shaft won't budge.
Any trick on getting it out?

[JrZook]

WD40 and tap with hammer?

[Ben_Sierra]

Hit it.

If that doesn't work, hit it harder!

[SuziBlu]

Ben_Sierra wrote:

Hit it.

If that doesn't work, hit it harder!

Don't use force, use a bigger hammer.

[JrZook]

SuziBlu wrote:

Ben_Sierra wrote:

Hit it.

If that doesn't work, hit it harder!

Don't use force, use a bigger hammer.

F=m*a how can you not use force?

[stockman]

I only tried the strong arm. I will try hammer next!

[Ben_Sierra]

JrZook wrote:

SuziBlu wrote:

Ben_Sierra wrote:

Hit it.

If that doesn't work, hit it harder!

Don't use force, use a bigger hammer.

F=m*a how can you not use force?

Bigger hammer, less acceleration, same force

[SuziBlu]

lol was meant as a silly, but instead of smacking the shit out of it with a light hammer, let inertia do the job, use a bigger hammer, swung with good force, much more inertia.

Always use a brass drift, never steel on steel.

[steak_knife]

Has an O'ring on the end, could have corosion in there to, so wd or similar & a lil love tap should see you clear...

[PJ.zook]

I find that swearing at it and graphically describing sexual acts I would do to its mother helps things along.

[Built4thrashing]

threaten it with a 9 inch. .. grinder

[zukenutter]

Why does the counter shaft protrude through the case, thus needing an 'O' ring? Is there a maintenance reason for this?