| Author |
Message |
Damo

az supporter
Joined: Sat Jul 22, 2006 11:30 pm Posts: 4661 Location: Brisbane
|
 Posted: Thu Oct 02, 2008 8:31 pm |
|
|
I went to run the lines for my airlockers but couldn't figure out a nice route for them. I have the compressor mounted on the top of the wheel well behind the driver's seat.
Any other ideas?
_________________ SJ50.4.LYF
|
|
|
|
 |
royce

omnipotent being
Joined: Sun Jun 11, 2006 11:30 pm Posts: 17216 Location: Pluto
|
 Posted: Thu Oct 02, 2008 8:34 pm |
|
|
inside where the rear panel would be and down through the fuel filler?
mine was under the passenger seat with lines through the floor and along the chassis
|
|
|
|
 |
joeblow
Joined: Sat May 10, 2008 11:30 pm Posts: 3273 Location: melbourne
|
 Posted: Thu Oct 02, 2008 8:51 pm |
|
|
drill a small hole and use a grommet. we always cover the lines with corrogated plastic tubing too. don't forget to buy exhaust adaptors (screw on the top of the solenoids) so you can vent the solenoids outside the vehicle.
_________________ builder of custom road legal zooks......and stuff.
|
|
|
|
 |
TZAR

az supporter
Joined: Tue Aug 01, 2006 11:30 pm Posts: 3459 Location: licking some windows
Vehicle: LJ20 LJ50
|
 Posted: Thu Oct 02, 2008 9:38 pm |
|
|
I had mine in the cruiser behind the passenger seat. Scared the hell out of my passenger and I everytime it cut back in.
I like Royces Idea cause then you could fit a nitto fitting for pumping up your tyres coming out of the rear panel. You could mould it into a twin cigarette lighter type fitting and have it flush so it doesn't interfere wth anything
Also the plumbing can be routed along the fuel lines to the front making it nice and neat.
_________________ Camels have nice toes
|
|
|
|
 |
Damo

az supporter
Joined: Sat Jul 22, 2006 11:30 pm Posts: 4661 Location: Brisbane
|
 Posted: Thu Oct 02, 2008 10:42 pm |
|
Some handy tips there thanks guys.
joeblow wrote: don't forget to buy exhaust adaptors (screw on the top of the solenoids) so you can vent the solenoids outside the vehicle.
Why do I want to do this Joe? I didn't know you could get 'exhaust adapters'.
_________________ SJ50.4.LYF
|
|
|
|
 |
royce

omnipotent being
Joined: Sun Jun 11, 2006 11:30 pm Posts: 17216 Location: Pluto
|
 Posted: Thu Oct 02, 2008 10:56 pm |
|
yeah bugger that you wont be able to hear them 
|
|
|
|
 |
Damo

az supporter
Joined: Sat Jul 22, 2006 11:30 pm Posts: 4661 Location: Brisbane
|
 Posted: Thu Oct 02, 2008 11:20 pm |
|
royce wrote: yeah bugger that you wont be able to hear them 
Maybe I can hook up a funny sounding whistle to them or something 
_________________ SJ50.4.LYF
|
|
|
|
 |
lump_a_charcoal

az supporter
Joined: Wed Feb 28, 2007 10:30 pm Posts: 4454 Location: Botany, NSW
Vehicle: MY2019 Jimny
|
 Posted: Fri Oct 03, 2008 12:13 am |
|
|
Yeah get a fully sick blow off valve bro...
|
|
|
|
 |
Dee
Joined: Tue Jul 10, 2007 11:30 pm Posts: 222 Location: Sunshine Coast
|
 Posted: Fri Oct 03, 2008 6:31 pm |
|
Damo wrote: Some handy tips there thanks guys. joeblow wrote: don't forget to buy exhaust adaptors (screw on the top of the solenoids) so you can vent the solenoids outside the vehicle. Why do I want to do this Joe? I didn't know you could get 'exhaust adapters'.
So ya don’t get a whiff of diff oil every de-activation of a locker.
I like the smell. It’s my musk.

|
|
|
|
 |
Damo

az supporter
Joined: Sat Jul 22, 2006 11:30 pm Posts: 4661 Location: Brisbane
|
 Posted: Fri Oct 03, 2008 6:54 pm |
|
Dee wrote: Damo wrote: Some handy tips there thanks guys. joeblow wrote: don't forget to buy exhaust adaptors (screw on the top of the solenoids) so you can vent the solenoids outside the vehicle. Why do I want to do this Joe? I didn't know you could get 'exhaust adapters'. So ya don’t get a whiff of diff oil every de-activation of a locker. I like the smell. It’s my musk. 
I use 80W90 as aftershave, so no problem
I'm going to have another look and will probably go with what Royce suggested.
_________________ SJ50.4.LYF
|
|
|
|
 |
lump_a_charcoal

az supporter
Joined: Wed Feb 28, 2007 10:30 pm Posts: 4454 Location: Botany, NSW
Vehicle: MY2019 Jimny
|
 Posted: Fri Oct 03, 2008 6:58 pm |
|
|
what about the engine bay?
|
|
|
|
 |
Damo

az supporter
Joined: Sat Jul 22, 2006 11:30 pm Posts: 4661 Location: Brisbane
|
 Posted: Fri Oct 03, 2008 7:27 pm |
|
lump_a_charcoal wrote: what about the engine bay?
Running out of room in there!!! 
_________________ SJ50.4.LYF
|
|
|
|
 |
|