[steve]

you know, you don't have to say anything on auszookers, but anything you say, can and will be used as evidence on google in their search engines

=====

All my stock control arm bushes are flogged out and I want some new joints and would love these creeper joints, but they are $84 each which is getting up there because i want atleast 4 to start with. possibly 8. ( they were $65 before the dollar went crap. I knew i should have bought them before)

So just wondering if hiem joints are cheeper? I'm having trouble finding them on the net.

[royce]

yes they are massively, I can get em cheap as but apprently they are shit, but any bearing place will have good ones

[TZAR]

http://stores.ebay.com/QS-Components_5- ... idZ2QQtZkm

http://www.dauntlessmotors.com/Mounting ... mounts.htm

or locally CBC

http://www.conbear.com/sliding_bearings.htm

[steve]

thanks jock, yer i looked at that site but didn;t see their ebay stuff.

$181 US for 8, plus shipping.... so might be $450

[TZAR]

http://cgi.ebay.com/ebaymotors/4-LINK-K ... QQtcZphoto

$127 for 8 and then you just weld up some control arms from 1 1/4 tube that has been strengthened and keep your old arms as spares ;_0

[royce]

they look like the shit ones to me, I'll find out what ours are worth and you can decide if you want to have a go at em

factor big money for something to cut the thread into the arms too

/bright idea

ive always thought about getting the bits that make up a johnny joint cast in urethane I reckon if somebody can machine the bits from steel for one to fit in 40nb or something then knock a few out that can be clamped together with the mounting bolt it would work better than urethane and cheaper than heims

[TZAR]

that last one is for budget ones that come with weld in threads ( like a super nutsert) for the steel tmake your own new arms. rated at 18000 pounds ( 9000kgs)

The dearer ones are chrome moly higher quality ones.

[steve]

royce wrote:

ive always thought about getting the bits that make up a johnny joint cast in urethane I reckon if somebody can machine the bits from steel for one to fit in 40nb or something then knock a few out that can be clamped together with the mounting bolt it would work better than urethane and cheaper than heims

ya lost me, can you do a noob cad drawing of that?

[royce]