auszookers.com • View topic - Will my a/c bolt up to a g16b?

Board index » Talking About Stuff » Suzuki Talk

Will my a/c bolt up to a g16b?

Page 1 of 1

[ 10 posts ]

Print view

Previous topic | Next topic

Author

Message

matfan

az supporter

Joined: Sat May 29, 2010 4:27 pm
Posts: 935
Location: Paraguay
Vehicle: WT Tinny, NT lwb, 1L lwb

Posted: Thu Oct 13, 2011 10:45 am

Hi Guys,

About to do the g16 swap into my sierra, I'm currently running factory air con and just want to know if I'm wrong to assume that the compressor will bolt up to the 1.6??

Cheers

BlueSuzy

az supporter

Joined: Sun May 04, 2008 11:30 pm
Posts: 9716
Location: NSW
Vehicle: SJ51 LWB, SJ70 SWB

Posted: Thu Oct 13, 2011 11:03 am

Is your g13b multiv?
Is your g16b multiv?

It may boltup, but the pulleys may differ! On mine im going to run a jimny compressor(multiv) with adaptor hoses to the sierra firewall/ac box..

_________________

BlueSuzy wrote:

I'm over the G16b's.

CairnsZook

az supporter

Joined: Tue Jul 18, 2006 11:30 pm
Posts: 872
Location: West Coast
Vehicle: Zookless

Posted: Thu Oct 13, 2011 12:17 pm

Yes your AC pump bracket will bolt directly to the G16B.
But as BlueSuzy says, they pulleys are different. Sierra AC has a V pulley, G16B block has a ribbed pulley. You'll need to change the AC pulley to suit.

shep

Joined: Thu Mar 29, 2007 11:30 pm
Posts: 14498
Location: Here there everywhere
Vehicle: A manly awesome man jimny

Posted: Thu Oct 13, 2011 7:30 pm

CairnsZook wrote:

Yes your AC pump bracket will bolt directly to the G16B.
But as BlueSuzy says, they pulleys are different. Sierra AC has a V pulley, G16B block has a ribbed pulley. You'll need to change the AC pulley to suit.

really? mine didn't and it didn't by a lot.

i would tell ya what i did to my aircon when i did the g16 conversion however you are a fuckwit so i wont :wink:

_________________
JEEPJEEPJEEPJEEPJEEPJEEPJEEPJEEPJEEP

CairnsZook

az supporter

Joined: Tue Jul 18, 2006 11:30 pm
Posts: 872
Location: West Coast
Vehicle: Zookless

Posted: Thu Oct 13, 2011 7:43 pm

shep wrote:

really? mine didn't and it didn't by a lot.

Here's the Sierra AC bracket bolted directly onto the G16B. (bracket in front of oil filter)

shep wrote:

i would tell ya what i did to my aircon when i did the g16 conversion however you are a fuckwit so i wont :wink:

err, ok. Thanks :roll:

shep

Joined: Thu Mar 29, 2007 11:30 pm
Posts: 14498
Location: Here there everywhere
Vehicle: A manly awesome man jimny

Posted: Thu Oct 13, 2011 8:03 pm

my sierra bracket had 3 mounting points,one on the front of the motor and 2 on the side, the top side mount was out by about 25mm. if ya
dont think matfan is a fuckwit then ya should check out his old posts.

_________________
JEEPJEEPJEEPJEEPJEEPJEEPJEEPJEEPJEEP

matfan

az supporter

Joined: Sat May 29, 2010 4:27 pm
Posts: 935
Location: Paraguay
Vehicle: WT Tinny, NT lwb, 1L lwb

Posted: Thu Oct 13, 2011 9:13 pm

Cheers guys, well hopefully it'll go on easily, if not I guess I'll have to make some sort of adapter out of matchsticks and clag glue.

Oh and I second sheps comment, I just had a bit of a read through some of my old posts.... I really am a fuckwit!

_________________
JrZook - Mine only hangs 2.5".

matfan

az supporter

Joined: Sat May 29, 2010 4:27 pm
Posts: 935
Location: Paraguay
Vehicle: WT Tinny, NT lwb, 1L lwb

Posted: Thu Oct 13, 2011 9:18 pm

Come to think of it, the clutch on the a/c compressor is a little bit dodge at the moment, I wonder if I could replace the whole clutch/pulley assembly with a multiV......

_________________
JrZook - Mine only hangs 2.5".

CairnsZook

az supporter

Joined: Tue Jul 18, 2006 11:30 pm
Posts: 872
Location: West Coast
Vehicle: Zookless

Posted: Thu Oct 13, 2011 11:07 pm

Ahh, I see...

Shep, didn't you have a different compressor though? Maybe a different bracket as well?
My bracket also has three holes, they all lined up perfectly.

Mat, one of these might work.

matfan

az supporter

Joined: Sat May 29, 2010 4:27 pm
Posts: 935
Location: Paraguay
Vehicle: WT Tinny, NT lwb, 1L lwb

Posted: Thu Oct 13, 2011 11:16 pm

Cheers for that, I guess I can save my matchsticks and clag glue for the exo build!

_________________
JrZook - Mine only hangs 2.5".

Page 1 of 1

[ 10 posts ]

Board index » Talking About Stuff » Suzuki Talk

Who is online

Users browsing this forum: Gwagensteve and 267 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum