auszookers.com • View topic - Vitara carby on sierra 1.3

Board index » Talking About Stuff » Suzuki Talk

Vitara carby on sierra 1.3

Page 1 of 1

[ 12 posts ]

Print view

Previous topic | Next topic

Author

Message

zooker

az supporter

Joined: Sun Aug 06, 2006 11:30 pm
Posts: 596
Location: Queanbeyan

Posted: Wed Aug 10, 2011 3:31 am

I've just replaced my sierra carby and inlet manifold with one off a G16A vitara carby engine. I have three questions to those that have done this before:

1. Do you have to use the vitara accelerator cable or modify the sierra one? The cable I have is too long as the mounting for it on the vit carby is further over than on the sierra carb.

2. Where is this vacuum hose meant to hook up to. It comes out of the bottom of the passenger side of the carb, where three vac hoses come out together. It then loops around the front of the carb and over the thermostat housing.

3. Whats this hose for? I've blocked it off as there's nowhere on a sierra for it.

_________________
Member of C.O.R 4x4

Reubs

Joined: Wed Sep 09, 2009 11:30 pm
Posts: 1522
Location: Brisbane
Vehicle: SJ80, SE416

Posted: Wed Aug 10, 2011 3:38 am

Hose no.3 goes into the charcoal canister (mounted above the steering box in a Vitara instead of the firewall in a Sierra).

Not sure of the others without having a look at my vehicles.

zooker

az supporter

Joined: Sun Aug 06, 2006 11:30 pm
Posts: 596
Location: Queanbeyan

Posted: Wed Aug 10, 2011 3:40 am

Ah thanks for that. I'll just leave it blocked then

_________________
Member of C.O.R 4x4

zooker

az supporter

Joined: Sun Aug 06, 2006 11:30 pm
Posts: 596
Location: Queanbeyan

Posted: Fri Aug 12, 2011 6:12 am

bump

Surely someone has done this mod

_________________
Member of C.O.R 4x4

SierraDan

az supporter

Joined: Fri Feb 04, 2011 10:55 pm
Posts: 9348
Location: Newcastle
Vehicle: G13BB Jimny

Posted: Fri Aug 12, 2011 7:05 am

The bottom picture looks the same as my valve cover breather...

_________________
mlm

turbo_deo

Joined: Mon Oct 11, 2010 5:14 am
Posts: 542
Location: Newcastle
Vehicle: Work van

Posted: Fri Aug 12, 2011 7:11 am

I have a g16a in my zook I will try and have a look for you tonight and report back :helloo:

Edit:I think number one runs to the airbox possibly? Will double check this

number 2 on mine is looped between two of the nipples where it comes off the carby, I will get some photos for you tomorrow

_________________
Swb softie spoa cromo front -50 beadlocks 6.5s

Last edited by turbo_deo on Fri Aug 12, 2011 8:55 am, edited 1 time in total.

BlueSuzy

az supporter

Joined: Sun May 04, 2008 11:30 pm
Posts: 9716
Location: NSW
Vehicle: SJ51 LWB, SJ70 SWB

Posted: Fri Aug 12, 2011 8:09 am

Get efi

_________________

BlueSuzy wrote:

I'm over the G16b's.

zooker

az supporter

Joined: Sun Aug 06, 2006 11:30 pm
Posts: 596
Location: Queanbeyan

Posted: Mon Aug 15, 2011 2:30 am

BlueSuzy wrote:

Get efi

sell me a cheap efi engine Armsup

_________________
Member of C.O.R 4x4

deegs88

Joined: Tue Jul 26, 2011 4:46 am
Posts: 59
Location: QLD

Posted: Tue Aug 16, 2011 8:11 am

do you have more power after you put the vitara carby in

mavmitchell

Joined: Sat Jul 16, 2011 8:08 am
Posts: 6
Location: Perth

Posted: Tue Aug 16, 2011 10:51 am

Hi,

The small hose(one of the 3) goes to the canister, 1 to the vac advance, and 1 to the EGR.(yours is already in place)
The sierra Canaster only has 2 pipes on it, one to the tank vent and this one(purge line).

The large hose from the top of the carb(number 3) is the carb vent, but only when the engine is not running. The Small solenoid on top of the carb vents the float chamber to the throat during running, and this pipe when turned off..

BlueSuzy

az supporter

Joined: Sun May 04, 2008 11:30 pm
Posts: 9716
Location: NSW
Vehicle: SJ51 LWB, SJ70 SWB

Posted: Tue Aug 16, 2011 1:30 pm

zooker wrote:

BlueSuzy wrote:

Get efi

sell me a cheap efi engine Armsup

I need mine as spare, Since everything that turns into a big problem tends to happen with you. :mrgreen:

Overheat motor. check
Blow rear diff. check

:peaceout:

_________________

BlueSuzy wrote:

I'm over the G16b's.

Brett

az supporter

Joined: Tue May 27, 2008 11:30 pm
Posts: 1791
Location: Central coast NSW

Posted: Sat Dec 10, 2011 11:20 pm

i have a question, what heater hose do i block off? there is 3 on the carby and only 2 in the sierra.

Page 1 of 1

[ 12 posts ]

Board index » Talking About Stuff » Suzuki Talk

Who is online

Users browsing this forum: No registered users and 242 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum