auszookers.com • View topic

Board index » Talking About Stuff » Suzuki Talk

Jimny lean??

Page 1 of 1

[ 19 posts ]

Print view

Previous topic | Next topic

Author

Message

monley

az supporter

Joined: Wed Nov 24, 2010 7:58 am
Posts: 11092
Location: Mandurah.W.A.
Vehicle: 84 LWB NT

Posted: Mon Sep 12, 2011 7:38 am

My jimny has a bit of a lean...well a 30mm lean, over to the drivers side

. I can not figure out what is causing this, the front springs got replaced 2 weeks, with 80mm Tough dog HD coils (+30mm coils spacers in the front) and the rear has tough dog 80mm lifted coils to.

It has been this way for about 3-4 months now, and i can not find any reason for the "lean", i have checked the coils towers and they all seem straighten and UN-damged.

Could the rear drivers side coil be sagged even though it hardly has weight on it? If the panhard rods, were slightly out of adjustment would this cause issues?

It's pissing me off, so any one have any idea's whats causing this?

Cheers,

Monkey.

P.S. it has been like this pre-bent diff days. :roll:

_________________
Tell my arse, he actually gives a crap!

FullyZooked

az supporter

Joined: Mon Oct 25, 2010 9:01 am
Posts: 1009
Location: Bendigo

Posted: Mon Sep 12, 2011 7:46 am

Easy, don't jump jimnys and don't eat so many burgers

Sorry mate that's all I got...I'm sure the sierra boys will jump in as they to can suffer from the dreaded sideways lean.

_________________
Built Suzuki's shall reign Victorious.

swifty_ano

Joined: Tue Jun 29, 2010 4:17 am
Posts: 1664
Location: Brisbane, QLD

Posted: Mon Sep 12, 2011 7:47 am

I would say dodgey springs. Possibly wrong rate on one?
Obviously you have checked that the drivers side spring and passenger side spring are right way around?

monley

az supporter

Joined: Wed Nov 24, 2010 7:58 am
Posts: 11092
Location: Mandurah.W.A.
Vehicle: 84 LWB NT

Posted: Mon Sep 12, 2011 7:50 am

FullyZooked wrote:

Easy, don't jump jimnys and don't eat so many burgers

Sorry mate that's all I got...I'm sure the sierra boys will jump in as they to can suffer from the dreaded sideways lean.

This was pre jumped days :lol:

and I only weigh 70kg :roll:

_________________
Tell my arse, he actually gives a crap!

monley

az supporter

Joined: Wed Nov 24, 2010 7:58 am
Posts: 11092
Location: Mandurah.W.A.
Vehicle: 84 LWB NT

Posted: Mon Sep 12, 2011 7:52 am

swifty_ano wrote:

I would say dodgey springs. Possibly wrong rate on one?
Obviously you have checked that the drivers side spring and passenger side spring are right way around?

The springs are the right way round, I even tried different springs in the rear to see if it was the springs....it was not, it still leans over.

_________________
Tell my arse, he actually gives a crap!

suzukiboy

Joined: Sat Jul 22, 2006 11:30 pm
Posts: 607
Location: Brisbane
Vehicle: Suzuki Grand Vitara

Posted: Mon Sep 12, 2011 7:55 am

I had the same problem with my Vitara, so I added a spring spacer to just the rear drivers side.

Moag

az supporter

Joined: Thu Mar 04, 2010 10:30 pm
Posts: 411
Location: Kununurra WA ^ Top End
Vehicle: 2001 Jimny M13A

Posted: Mon Sep 12, 2011 9:00 am

Hey Monkey,

Have you got your rear springs on the right side??
My 60mm TD were different lengths (about 15mm) and marked R for right and L for left from memory.

Jimny Shocks and Springs

monley

az supporter

Joined: Wed Nov 24, 2010 7:58 am
Posts: 11092
Location: Mandurah.W.A.
Vehicle: 84 LWB NT

Posted: Mon Sep 12, 2011 10:03 am

Yep there are in the right way, long spring goes on the drivers side.

_________________
Tell my arse, he actually gives a crap!

ando_zook94

Joined: Sun May 09, 2010 9:23 pm
Posts: 263
Location: brissy

Posted: Mon Sep 12, 2011 10:13 am

Its called.. "Swagger"

_________________
If in doubt power out!

alien

Joined: Wed Mar 24, 2010 10:30 pm
Posts: 16343
Location: Perth
Vehicle: '92 Sierra, 1.6efi, SPOA, 31s.

Posted: Mon Sep 12, 2011 10:26 am

ando_zook94 wrote:

Its called.. "Swagger"

rofl

_________________

sogone

az supporter

Joined: Mon Oct 25, 2010 11:29 am
Posts: 2070
Location: Darwin

Posted: Mon Sep 12, 2011 10:30 am

ando_zook94 wrote:

Its called.. "Swagger"

Bahahahahaha

monley

az supporter

Joined: Wed Nov 24, 2010 7:58 am
Posts: 11092
Location: Mandurah.W.A.
Vehicle: 84 LWB NT

Posted: Mon Sep 12, 2011 10:40 am

I've got an idea to see if the lean is coming from the front or the back.

_________________
Tell my arse, he actually gives a crap!

monley

az supporter

Joined: Wed Nov 24, 2010 7:58 am
Posts: 11092
Location: Mandurah.W.A.
Vehicle: 84 LWB NT

Posted: Wed Sep 14, 2011 9:14 am

If i don;t have one pan hard rod centered right, could that cause some of the lean? The front springs are running on a bit of angle, so much of a angle the drivers side fowls on the chassis when flexing :lol:

_________________
Tell my arse, he actually gives a crap!

zooky08

az supporter

Joined: Fri Nov 27, 2009 10:30 pm
Posts: 3426
Location: imbil/gympie. qld
Vehicle: 03 Jimny

Posted: Sat Dec 24, 2011 2:17 am

Hey monkey do you still have your lean.
Mine is very noticeable. Everything seems to be fine, springs etc.
Mine only got the lean after I installed the arms which is quite weird.
I cannot figure it out, I have no idea what it could be.

_________________
03 Jimny 30 km2s 75mm lift f&r locked winch

monley

az supporter

Joined: Wed Nov 24, 2010 7:58 am
Posts: 11092
Location: Mandurah.W.A.
Vehicle: 84 LWB NT

Posted: Sat Dec 24, 2011 3:22 am

Yep still got it

Close to 30mm on the drivers side, but it I put the drivers side td coil in with a stock front in the rear on the passenger side, the lean goes away :lol:

_________________
Tell my arse, he actually gives a crap!

joel

Joined: Wed Jan 27, 2010 10:30 pm
Posts: 2191
Location: Dirranbandi
Vehicle: Sj70 tintop

Posted: Sat Dec 24, 2011 3:27 am

ive seen lots of jimnys lean.... some lean right onto there roof pretty often on this sight

_________________
Sj70 tintop

zooky08

az supporter

Joined: Fri Nov 27, 2009 10:30 pm
Posts: 3426
Location: imbil/gympie. qld
Vehicle: 03 Jimny

Posted: Sat Dec 24, 2011 3:43 am

monkey wrote:

Yep still got it

Close to 30mm on the drivers side, but it I put the drivers side td coil in with a stock front in the rear on the passenger side, the lean goes away :lol:

So yours is 30mm higher on drivers side?

_________________
03 Jimny 30 km2s 75mm lift f&r locked winch

monley

az supporter

Joined: Wed Nov 24, 2010 7:58 am
Posts: 11092
Location: Mandurah.W.A.
Vehicle: 84 LWB NT

Posted: Sat Dec 24, 2011 4:29 am

30mm lower on drivers side...

_________________
Tell my arse, he actually gives a crap!

zooky08

az supporter

Joined: Fri Nov 27, 2009 10:30 pm
Posts: 3426
Location: imbil/gympie. qld
Vehicle: 03 Jimny

Posted: Sat Dec 24, 2011 4:58 am

Same as mine. What I don't get is that it was perfect before the arms went in

_________________
03 Jimny 30 km2s 75mm lift f&r locked winch

Page 1 of 1

[ 19 posts ]

Board index » Talking About Stuff » Suzuki Talk

Who is online

Users browsing this forum: No registered users and 244 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum