[hutch]

After having a look around my new project, and taking it for a bit of a drive the motor is spluttering a bit.
I have a few questions... but first some details.

It has a G1.6B motor block.
It also apprently has a 1.3 sieera carby on it, which I assume is the problem with it spluttering.
When the motor gets warmed up it sends out light smoke out the exhuast, I assume it is to do with the carby.
Suzisport Lawton performed the work on it about 3000kms ago according to the reciepts.
I have another carby here which looks different to the 1.3. It could be a vitara. The carby has a throttle possition sensor on it. See pics.

Ok now for the questions.
a) Is this motor a vitara motor?
b) Is the G16B motor ideal for an EFI conversion?
c) Does it have the Vitara head on it?
d) What is the Carby (pictured)?
e) Can that Carby bolt stratight onto the motor I have?
f) Is that carby suitable for an EFI conversion?
What else needs to be done for EFI conversion. eg Computer/injection setup etc?

Any help greatly appreciated
Pics









Cheers
Hutch

[royce]

its a 1.6, the carby you are holding up is a vit carby

carbys have nothing to do with EFI, likewise you need to know what the problem is before you can work out how to fix it

[hutch]

Thanks royce.
Would fitting the VIT carby (one I am holding) be a better match for the motor than the 1.3 carb on it?
cheers
Hutch