| Author |
Message |
guinness
Joined: Wed Aug 06, 2008 11:30 pm Posts: 107 Location: perth
|
 Posted: Thu May 02, 2013 10:00 am |
|
|
Hi guys,
I'm looking for recommendations for AT tyres to replace the stock tyres on my GV3. Sadly spend much more time on bitumen, but want more capability off road - looking for good all rounders. more likely to be on sand than mud but you never know. thinking standard size tyres, as I have no lift - and the manual gearing is already a bit tall IMHO.
cheers
|
|
|
|
 |
vitzookman
Joined: Wed Feb 16, 2011 6:14 am Posts: 347 Location: Bris
Vehicle: 2001 XL7
|
 Posted: Thu May 02, 2013 10:03 am |
|
|
225 75 16 Maxxis 700 or 771 ( same tyre )
|
|
|
|
 |
tanshi

az supporter
Joined: Tue Jan 09, 2007 10:30 pm Posts: 7717 Location: Brisbane
|
 Posted: Thu May 02, 2013 10:11 am |
|
|
i run yokohama AT-s, great tyres
|
|
|
|
 |
steve125
Joined: Sun Sep 05, 2010 11:58 am Posts: 427 Location: Melbourne
Vehicle: LWB Sierra (assembly required)
|
 Posted: Thu May 02, 2013 4:22 pm |
|
|
Buy a spare set of rims and put some 245/75 16 mud terrains on them. Just my opinion, but better to have a road tyre for the road and an offroad tyre for the dirt than a compromise AT tyre for both. Especially if you are only occasionally going offroad.
Gearing will be more of a problem, but you get grip and a fraction more clearance.
And you don't need lift to fit bigger tyres.
|
|
|
|
 |
guinness
Joined: Wed Aug 06, 2008 11:30 pm Posts: 107 Location: perth
|
 Posted: Thu May 02, 2013 6:15 pm |
|
|
so out of interest what size tyres fit with no scrubbing on the GVs?
|
|
|
|
 |
Built4thrashing
Joined: Wed May 21, 2008 11:30 pm Posts: 4972 Location: Dandenong .Vic
Vehicle: 1999 GV. Locked and Lifted
|
 Posted: Thu May 02, 2013 6:51 pm |
|
|
225/75/16 fit with no lift and no scrubbing. 245/75/16 fit with but just touch inner guard on full lock
|
|
|
|
 |
guinness
Joined: Wed Aug 06, 2008 11:30 pm Posts: 107 Location: perth
|
 Posted: Thu May 09, 2013 11:06 am |
|
|
thanks for the info guys having done some research it's easiest to get a good price on the maxxis at the moment. i'm told the 225 75 16s come in 8 and 10 ply 8 ply - $195 ea 10 ply - $ $230 ea
tyre guy is recommending 8 ply (which surprised me)
what do you guys think?
|
|
|
|
 |
Gwagensteve
Joined: Thu Feb 26, 2009 10:30 pm Posts: 13007 Location: Melbourne
|
 Posted: Thu May 09, 2013 11:11 am |
|
|
Why did that surprise you? 8 ply tyres will be lighter, ride better, and respond better to being aired down (as in deform at a higher pressure) Personally, I'd prefer 6 ply/load range C for a car like a GV, and it's likely that that's what the stock tyres are.
You don't need 10 ply tyres for a light car.
I have seen this a bit though. It seems that 225 75 and 245 75 are commonly used on US pickups with huge load ratings, so it's common to see these tyres with 10 ply/load range E construction.
Steve.
|
|
|
|
 |
guinness
Joined: Wed Aug 06, 2008 11:30 pm Posts: 107 Location: perth
|
 Posted: Thu May 09, 2013 11:13 am |
|
|
ha - no it didnt surprise me that they'd be better - just that a salesman would recommend a cheaper tyre i'm a cynical bastard
|
|
|
|
 |
Gwagensteve
Joined: Thu Feb 26, 2009 10:30 pm Posts: 13007 Location: Melbourne
|
 Posted: Thu May 09, 2013 11:18 am |
|
|
He's not gong to want you to come back and complain that you were sold the wrong tyre though and then have to swap them/piss off a customer.
Steve.
|
|
|
|
 |
|