alright sweet thanks
| auszookers.com https://auszookers.com/forum/ |
|
| gearbox linkage https://auszookers.com/forum/viewtopic.php?f=5&t=10060 |
Page 1 of 1 |
| Author: | coilyzook [ Wed Feb 24, 2010 4:41 am ] |
| Post subject: | gearbox linkage |
i think i broke it, i was wondering how much it usually is to fix it in a coily sierra |
|
| Author: | Taff [ Wed Feb 24, 2010 5:31 am ] |
| Post subject: | Re: gearbox linkage |
gearbox linkage? As in clutch? |
|
| Author: | paulv [ Wed Feb 24, 2010 5:33 am ] |
| Post subject: | Re: gearbox linkage |
These guys have it? http://www.suzistore.com.au/shopdisplay ... J80%2DCOIL |
|
| Author: | coilyzook [ Wed Feb 24, 2010 1:45 pm ] |
| Post subject: | Re: gearbox linkage |
nah not the clutch, the link between the gear stick and the gear box the car is stuck in one gear and the gear stick flops around. the clutch still works but i cant go anywhere because its stuck in 4th so yea its some sort of link between the gear stick and the selector mechanism in the gearbox |
|
| Author: | mrw82 [ Wed Feb 24, 2010 2:34 pm ] |
| Post subject: | Re: gearbox linkage |
that will be the locating bolt for the gearstick. cheap and easy to replace. while your there you may aswell replace the shift bush too. when your pulling the gearstick out you will see whats wrong. theres a slot in the loacting ball on the stick, in the housing there is a bolt which should have a turned down section which locates in this slot, but it won't be there. one of these: http://www.suzistore.com.au/shopdisplay ... ANSMISSION measure the thread when you get it out. it'll either be 8mm or 10mm |
|
| Author: | coilyzook [ Wed Feb 24, 2010 9:51 pm ] |
| Post subject: | Re: gearbox linkage |
alright sweet thanks
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|