| auszookers.com https://auszookers.com/forum/ |
|
| vacume port blockers https://auszookers.com/forum/viewtopic.php?f=5&t=10094 |
Page 1 of 1 |
| Author: | jonno_racing [ Thu Feb 25, 2010 2:56 pm ] |
| Post subject: | vacume port blockers |
after my gti conversion i have a few vacume ports that need blocking off.. one is the size of break booster line, gti has 2. Thinking about squezing shut and bronzing up.. it will never leak again but might be a pia if i have to fit all the emissions up. and a few little ones, same size as vacume advance, thinking about using rc car aierial tops? or can i get a specific thing? |
|
| Author: | mrw82 [ Thu Feb 25, 2010 3:09 pm ] |
| Post subject: | Re: vacume port blockers |
you can buy rubber blanking caps for them. go to ripco or somewhere |
|
| Author: | mnemonix [ Thu Feb 25, 2010 3:40 pm ] |
| Post subject: | Re: vacume port blockers |
called "Vacuum Caps". You'll find them in ebay in assorted boxes. ~$50 for a box of several hundred pieces of all sizes. Make sure you get a metric one. Or go to repco with specific measurements of what you need. They'll cost you a couple of bucks each. Or be a shonky bastard with a bit of vacuum line with a bolt in the end. 
|
|
| Author: | jonno_racing [ Thu Feb 25, 2010 4:15 pm ] |
| Post subject: | Re: vacume port blockers |
yeah thats what i used to have lol... trying to do everything properly this time! |
|
| Author: | mrw82 [ Thu Feb 25, 2010 4:33 pm ] |
| Post subject: | Re: vacume port blockers |
jonno_racing wrote: trying to do everything properly this time! really ??? jonno_racing wrote: Thinking about squezing shut and bronzing up..
bit of a contradiction there..... 
|
|
| Author: | jonno_racing [ Thu Feb 25, 2010 4:40 pm ] |
| Post subject: | Re: vacume port blockers |
lol its better than abit of pipe with a bolt in it |
|
| Author: | Taff [ Thu Feb 25, 2010 7:10 pm ] |
| Post subject: | Re: vacume port blockers |
no its not... for the little ones I use the rubber caps on the end of plastic coated wire coathangers. Just the right size and free if you raid the missuses wardrobe. |
|
| Author: | mnemonix [ Thu Feb 25, 2010 9:28 pm ] |
| Post subject: | Re: vacume port blockers |
Taff wrote: no its not...
for the little ones I use the rubber caps on the end of plastic coated wire coathangers. Just the right size and free if you raid the missuses wardrobe. But probably not heat and oil resistant. So be wary in a long term application. |
|
| Author: | lump_a_charcoal [ Thu Feb 25, 2010 11:02 pm ] |
| Post subject: | Re: vacume port blockers |
Taff wrote: no its not...
for the little ones I use the rubber caps on the end of plastic coated wire coathangers. Just the right size and free if you raid the missuses wardrobe. He doesn't have a missus any more you inconsiderate bastard... |
|
| Author: | Taff [ Fri Feb 26, 2010 3:45 am ] |
| Post subject: | Re: vacume port blockers |
lump_a_charcoal wrote: Taff wrote: no its not... for the little ones I use the rubber caps on the end of plastic coated wire coathangers. Just the right size and free if you raid the missuses wardrobe. He doesn't have a missus any more you inconsiderate bastard... Ohhhhh shit..... i totally forgot... how rude of me... seriously completely slipped my mind.
|
|
| Author: | lump_a_charcoal [ Fri Feb 26, 2010 4:07 am ] |
| Post subject: | Re: vacume port blockers |
And since he is now single, he is allowed to show us pics of those big ass ex titties! |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|