and the coilys front and rears the same??(I'm to busy to go and measure
)
| auszookers.com https://auszookers.com/forum/ |
|
| SJ80/Coily Radius Arm Help https://auszookers.com/forum/viewtopic.php?f=5&t=10198 |
Page 1 of 1 |
| Author: | unique_seek [ Thu Mar 04, 2010 8:46 pm ] |
| Post subject: | SJ80/Coily Radius Arm Help |
Hey guys, Haven't been on in a while.Quick question,do Jimny radius arms fit the SJ80 sierras???If so,anyone had any experience with tube radius arms?? Thanks |
|
| Author: | ZookiMonsta [ Thu Mar 04, 2010 9:53 pm ] |
| Post subject: | Re: SJ80/Coily Radius Arm Help |
The fronts are exactly the same, just the rears are longer. |
|
| Author: | unique_seek [ Thu Mar 04, 2010 9:54 pm ] |
| Post subject: | Re: SJ80/Coily Radius Arm Help |
and the coilys front and rears the same??(I'm to busy to go and measure )
|
|
| Author: | ZookiMonsta [ Thu Mar 04, 2010 9:57 pm ] |
| Post subject: | Re: SJ80/Coily Radius Arm Help |
unique_seek wrote: and the coilys front and rears the same??(I'm to busy to go and measure
)No, they are the same length, but the rears wrap around the diff housing more, where fronts pretty much bolt to the under side of the diff the rears bolt from front to back. I've looked into all this... I cant keep my arms straight
|
|
| Author: | unique_seek [ Thu Mar 04, 2010 10:08 pm ] |
| Post subject: | Re: SJ80/Coily Radius Arm Help |
so jimny and coilys the same?Sweet!yeah you can see the rear arms in the pic |
|
| Author: | BlueSuzy [ Fri Mar 05, 2010 4:24 am ] |
| Post subject: | Re: SJ80/Coily Radius Arm Help |
Are the standard jimny arms weak as piss? |
|
| Author: | jonno_racing [ Fri Mar 05, 2010 3:09 pm ] |
| Post subject: | Re: SJ80/Coily Radius Arm Help |
who makes those arms? |
|
| Author: | unique_seek [ Fri Mar 05, 2010 4:33 pm ] |
| Post subject: | Re: SJ80/Coily Radius Arm Help |
Not sure about the STD jimny arms,can anyone confirm whether the jimny arms are weak? The arms in the pic are made in Taiwan |
|
| Author: | Ridge [ Fri Mar 05, 2010 8:05 pm ] |
| Post subject: | Re: SJ80/Coily Radius Arm Help |
i wouldnt say the jimny arms are any stronger then the coilys. saam made his own arms out of tube for his coily. |
|
| Author: | ZookiMonsta [ Fri Mar 05, 2010 9:50 pm ] |
| Post subject: | Re: SJ80/Coily Radius Arm Help |
I compared my coily ones to the jimny ones I have on there now, and it looks like the Jimny arms have a bit more meat in the radius of the arm. |
|
| Author: | 2stroker [ Sat Mar 06, 2010 2:55 am ] |
| Post subject: | Re: SJ80/Coily Radius Arm Help |
Be careful making your own, pm Bugsta he had an awesome set of front tube arms made for his Jimny after bending his originals, the dude that made them is in Brisbane and he has a jig so that when he makes them he can set the caster correctly |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|