auszookers.com
https://auszookers.com/forum/

distributor wires
https://auszookers.com/forum/viewtopic.php?f=5&t=10200		 Page 1 of 1
Author:  zuk85 [ Thu Mar 04, 2010 9:53 pm ]
Post subject:  distributor wires
okay i got my replacement motor in connected everything sweet now i get to my dizzy and the wires that go to the coil i cant figure out which goes where ha ha ha ha
"thats what happens when u get mates ot help and they just get into it and not tell u wat they have undone and where they put them lol"

i have 2 wires comming from the dizzy 1 is branching off with a plug on it which i have plugged into its mate on the main harness on the firewall. now i have 2 left to go on the coil from the dizzy... plus. i have 2 on the coil 1 with a resistor of sum sort which is earthed then the other which is plugged into the main harness now im stuffed have tried different ways and im not getting any spark.

motor is kickin over :D just not sparkin
Author:  want33s [ Thu Mar 04, 2010 9:57 pm ]
Post subject:  Re: distributor wires
There are two wires from dizzy that go to coil..
YELLOW to + side.
Black to - side.
Ring me and I'll talk you through it.
Author:  zuk85 [ Thu Mar 04, 2010 10:19 pm ]
Post subject:  Re: distributor wires
gday jas im out of credit mate and the mrs is out at the hospital visitin her dad and has her phone :S:S

the dizzy has
BLACK with a terminal, and a BROWN wire branching off it with a plug" there is a plug to suit comming off the main harness?
YELLOW with a terminal

then not on the coil, but attached to its brackets
BLUE with terminal with a resistor then earthing
BLACK AND WHITE with terminal which goes into the main harness
Author:  want33s [ Thu Mar 04, 2010 11:32 pm ]
Post subject:  Re: distributor wires
Will you be home in the morning? I'll come and have a look.
Author:  zuk85 [ Fri Mar 05, 2010 1:12 am ]
Post subject:  Re: distributor wires
sorry jason i missed your call man :S:S:S

that would be sweet if you could come have a look i pm'd u my details.

josh
Author:  zuk85 [ Fri Mar 05, 2010 2:12 pm ]
Post subject:  Re: distributor wires
okay i found i had a blown fuse for the ignt coil, replaced that last night and did a few ways with the wires now i am getting spark.

when i kick it over all i get it little chugs then if i try to throttle on while kicking over it back fires with real loud pops.
Author:  want33s [ Fri Mar 05, 2010 2:14 pm ]
Post subject:  Re: distributor wires
Did you have the dizzy out at all?
Author:  zuk85 [ Fri Mar 05, 2010 2:18 pm ]
Post subject:  Re: distributor wires
nope i only changed the valve cover and the sump and i put a new dizzy cap on. but yea in my manual it says backfires could be timing or loose dizzy but i aint loose lol and i havnt touched the timing :S:S
Author:  want33s [ Fri Mar 05, 2010 2:33 pm ]
Post subject:  Re: distributor wires
I'll see you in half hour or so.
Author:  zuk85 [ Fri Mar 05, 2010 2:36 pm ]
Post subject:  Re: distributor wires
to easy mate thats will be sweet just let u know though i have to leave around 10-10:30 getting my licnece renewed and then heading to my dads in caboolture
Author:  want33s [ Fri Mar 05, 2010 3:48 pm ]
Post subject:  Re: distributor wires
All running sweet now.... :D
Author:  Ben_Sierra [ Fri Mar 05, 2010 4:30 pm ]
Post subject:  Re: distributor wires
So what was the problem?
Author:  want33s [ Fri Mar 05, 2010 5:05 pm ]
Post subject:  Re: distributor wires
Basically just the plug leads on the dizzy cap in the wrong order.
Author:  steak_knife [ Fri Mar 05, 2010 10:39 pm ]
Post subject:  Re: distributor wires
want33s wrote:
Basically just the plug leads on the dizzy cap in the wrong order.


Least the carb got a clean at the same time!!! :P :P :P
Author:  zuk85 [ Sat Mar 06, 2010 7:23 pm ]
Post subject:  Re: distributor wires
cheers jason

ha ha ha smallest things always cause the big problems :S:S

well now i just need a radiator that isnt blocked :D:D:D:D:D
Author:  want33s [ Sat Mar 06, 2010 7:30 pm ]
Post subject:  Re: distributor wires
zuk85 wrote:
cheers jason

ha ha ha smallest things always cause the big problems :S:S

well now i just need a radiator that isnt blocked :D:D:D:D:D

Take it to your work and use an oxy set to remove the top tank. Then shove a long dipstick down each and every tube. Refit top tank and away you go. :wink: :D
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/